Sensor de humedad del suelo SUT1

Budget-friendly price Request a quote
Humedad del suelo en VWC | 0÷100% VWC | FDR, no resistivo | ±3% (0-70% WC) | 0÷1,5Vdc diferencial | 5÷15 Vdc | IP68 · 145 x Ø40 mm

El NESA SUT1 es un sensor de humedad del suelo de alta precisión que mide el contenido volumétrico de agua (VWC) por reflectometría en el dominio de la frecuencia (FDR). Está compensado en temperatura, tiene una precisión de ±3% entre 0 y 70% de contenido de agua y trabaja en un rango de salinidad de 100 a 1000 mS/m.

La salida natural es 0÷1,5Vdc diferencial; con el módulo MCS se obtiene 0÷2Vdc, 4÷20mA o RS485/Modbus. Se alimenta a 5÷15 Vdc (20mA durante 1 s), trabaja de -20 a 60°C y se entrega con informe de calibración; no requiere mantenimiento ni recalibración.

Key points

  • Campo de medida 0÷100% VWC; precisión ±3% (0-70% WC); constante de tiempo 1 s
  • Medida FDR, no resistiva, compensada en temperatura; salinidad de 100 a 1000 mS/m
  • Salida natural 0÷1,5Vdc diferencial; con módulo MCS: 0÷2Vdc (A), 4÷20mA (B) o RS485/Modbus (C)
  • Alimentación 5÷15 Vdc, 20mA durante 1 s; protecciones contra inversión de polaridad y transitorios
  • Cuerpo de resina IP68 y electrodos de acero inoxidable; 100g; 145 x Ø40 mm
  • WMO; CE; se entrega con informe de calibración

Technical Frequently Asked Questions

¿Qué precisión tiene y en qué rango de humedad?

±3% entre 0 y 70% de contenido de agua (WC), con un campo de medida de 0÷100% VWC y una constante de tiempo de 1 s.

¿Qué salidas puedo conectar a mi datalogger?

La salida natural es 0÷1,5Vdc diferencial. Con el módulo MCS se obtiene 0÷2Vdc (A), 4÷20mA (B) o RS485/Modbus (C).

¿Con qué alimentación y en qué condiciones trabaja?

5÷15 Vdc, con un consumo de 20mA durante 1 s por medida. Trabaja de -20 a 60°C y en suelos con salinidad de 100 a 1000 mS/m; cuerpo de resina IP68 y electrodos de acero inoxidable.

Properties

FeatureSpecification
Measurement and operating principle
Measured magnitudeHumedad del suelo en VWC (contenido volumétrico de agua)
Measurement principleFDR (reflectometría en el dominio de la frecuencia)
Sensor typeNon-resistive
Measurement range0÷100% VWC
Precision±3% (0-70% WC)
Time constant1 s (tiempo medio)
Rango de salinidad100 a 1000 mS/m
Temperature compensationYeah
CalibrationIt comes with a calibration report
MaintenanceNo requiere mantenimiento ni recalibración
Regulatory complianceWMO; CE
Exit signals
Standard exit sign0÷1,5Vdc diferencial
With MCS module (optional)0÷2Vdc (A), 4÷20mA (B) o RS485/Modbus (C)
Power supply, environment, and mechanical data
Feeding5÷15 Vdc
Consumption20mA durante 1 s
Operating temperature-20 ÷ 60°C
ProtectionsAgainst polarity reversal and transients
BodyResina, IP68
ElectrodesStainless steel
Weight100g
Dimensions145 x Ø40 mm
Sensor de humedad del suelo de alta precisión SUT1 de NESA
Dimensiones del sensor de humedad del suelo SUT1 de NESA

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø4–8 mm | Housing Ø38 mm | 1 to 2500 impedances/revolution | Push-pull; line driver (5 V only) | Power supply 5 V ±5 %, 5–12 V, 12–24 V | IP54 shaft side | Elastic coupling
Dimetix_AG-1
Precision Mechanical Support for Laser Aiming Range: Mechanical adjustment of +/- 4° on two axes for stable readings at long distances
NESA Environmental Meters
RS485 | Water film 0–4 mm | Dry / Damp / Wet / Ice / Snow | IP68 | -30–+70°C | 120 x 50 mm
Monitran-Logo
Standalone RMS acceleration indicator | 2-digit LCD display | Displayed range 0-20 g RMS | Bandwidth 6 Hz – 5 kHz (nominal) | Lithium-manganese battery, 5 years | IP65 | -20 to +85 °C
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Conductivity sensor, CLAMP connection, K range = 0.1, temperature range -5 to 85ºC
DPF Sensors logo
Temperature and humidity transmitter. For ambient and duct use. Output signal: 4-20 mA, 0-10 VDC, and RS485.
Dimetix_AG-1
Extra Large Laser Reflection Sheet for Structural Customization Range: Extended extreme measurement scalability up to 500 meters
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø4–8 mm | Housing Ø48 mm | 1 to 2540 imp/rev | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP64 shaft (IP66 Z-seal) | Helical, optional flanges
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
63 mm square flange, Ø9.52 h7 shaft | Up to 65536 steps × 4096 revolutions | SSI with preset, Gray or binary | Optional Sin/Cos 1024 or RS422 16384 ppr | 10–30 V power supply | IP65 shaft (IP66 sealed) | Optional shaft Ø6, 8, 10, 11 or 12
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Ø 55mm | Shaft Ø 6 mm | Ub max. 42VDC | IP65 | 355° or 90°, continuous rotation
Shopping Basket