B&C SZ1131 pH Sensor
Combined glass/gel reference pH electrode, 9.5mm diameter Epoxy body and 1.5m cable with BNC connector.
- Manufacturer: B&C Electronics
- Category: Water quality, SENSORS, pH and Redox Probes
The B&C Electronics SZ1131 pH sensor is a universal digital sensor, compatible with all pH controllers on the market and for all types of stable processes. It provides reliable measurements even at the extremes of the pH range.
This pH electrode allows for precise measurement at an extraordinary cost. Its bulb is constructed of extra-hard glass, while the body is made of epoxy for added protection.
It contains a potassium chloride (KCl) solution inside, which extends its useful life and keeps it in good condition. The sensor does not require additional electrolyte.
Specially designed for greenhouse use.
Properties
- Measuring range: 0 to 13 pH
- Temperature range: 0 to 80 °C
- Body material: Epoxy
- Maximum pressure: up to 7 bars
- Connector: 1.5m cable with BNC connector
- Dimensions: 110mm length and 9.5mm diameter
- Application: pH measurement in greenhouses
- Zero Point: pH 7
- Accuracy: ± 0.03 pH unit
- Response time: < 10 seconds (95% response)
- pH electrode solution: pH buffer with added chloride
- Reference type: Annular ceramic, sealed
- External reference electrode solution: Polysaccharide gel, 4M KCI with AgCI
Other products
Housing Ø80 mm | Resolution up to 8192 steps/revolution (13-bit) | Gray, Binary, Excess, and BCD codes | Parallel, SSI, or analog output (mA/V) | Power supply: 5 V, 15 V, 8–24 V, 18–28 V, or 10–30 V | Ø8 h7 stainless steel spindle | Max. radial/axial load: 5 kg | Spindle-side protection: IP65 (IP66 sealed) | Max. continuous speed: 6000 rpm (3000 rpm sealed) | Operating temperature: 0…+70 °C
Power supply 5-30V | Shaft Ø8mm Stainless Steel | Weight 380g | Bearing life 1.5×10^9 rev | Impact resistance 50G | Vibration resistance 12G | Operating temperature 0-70°C | Pulses/Rev 1-1000 | Max frequency 40kHz | IP64 rating
Aluminum base | Valox 420 cover | Weight 570 g | Stainless steel shaft Ø9.52 | Shaft load 10 kg | Standard IP 65 | Max. RPM 6000 | Starting torque 18 gcm | High MTTFd | Temp. 0 ÷ 60 °C
Novotechnik TRS-0050 potentiometric linear sensor · reference 400023272 · travel 0…50 mm · M16 connector · spring return
Up to 100 m over natural surfaces and up to 500 m with reflector, typical accuracy of ±1 mm @2σ (±0.5 mm @1σ), and measurement frequency up to 100 Hz.
MAGNETIC LEVEL SWITCHES VARIABLE LENGTH
Linear Range 0-12mm | Sensitivity 1.0mV/µm | AISI 4140 Stainless Steel | Probe -30 to 180°C | Driver -20 to 80°C | M30 x 1.5 Thread | Frequency DC-10kHz | Linearity <1% | PEEK Tip | PTFE Cable
