Incremental Encoder I/56QJ
- Manufacturer: ELCIS Encoder
- Category: Encoder, Incremental Encoder, Low Cost Incremental Encoder, SENSORS
The ELCIS 56QJ (I/56QJ) is a patented incremental encoder with a 56 mm square flange. It features a composite base, a Valox 420 cover, and weighs 120 g. It has a solid stainless steel shaft (Ø8 h7, with Ø6, Ø10, and other diameters available upon request), a Ø16 h7 centering ring, and four Ø4.4 mm mountings on a 46 mm square. It delivers 1 to 1024 pulses per revolution at a maximum frequency of 60 kHz, using NPN, open collector NPN, push-pull, and line driver electronics (26LS31 and 88C30), with axial or radial output via cable or connectors.
With a composite material base, Valox 420 cap and a weight of 120 g, it offers a solid stainless steel shaft of Ø8 h7 (Ø6, Ø10 and Ø n options on request), Ø16 h7 centering and four Ø4.4 mm fixings on a 46 mm square.
It supplies from 1 to 1024 pulses per revolution with a maximum frequency of 60 kHz, with NPN, NPN open collector, push-pull and line driver electronics (26LS31 and 88C30), and axial or radial output via cable or connectors.
- Patented design: 56 mm square flange, with composite base and Valox 420 cap.
- Stainless steel shaft: solid shaft of Ø8 h7 with front centering of Ø16 h7 (options Ø6, Ø10 and Ø n on request).
- Square flange fixing: Ø4.4 mm drills on a 46 mm square.
- axle-side protection: IP53 standard; with sealed bearings (Z), IP64.
Technical Frequently Asked Questions
What are the mechanical characteristics of the I/56QJ encoder?
56 mm square flange, composite base, Valox 420 cap, 120 g weight, Ø8 h7 solid stainless steel shaft.
How is the front attachment of the 56QJ model performed?
With Ø4.4 mm holes on a 46 mm square and a Ø16 h7 front centering protrusion.
What electrical connection options are available?
Axial or radial output via 1 m CV cable (IP65), 9-pin sub-D connector (CD, IP63), 5-pin miniature connector (CE, IP64) or cable end connectors (IP65 at encoder output).
Properties
| Feature | Specification |
|---|---|
| Mechanics | |
| Housing | Square flange 56 mm, centered Ø16 h7 |
| Weight | 120 g |
| Axis | Solid shaft Ø8 h7 in stainless steel (customizable upon request) |
| max radial/axial load. | 1 kg |
| Electric | |
| Exit-side protection | According to connection: IP63 (CD), IP64 (CE), IP65 (CV and cable end) |
| Electronics | NPN, push-pull or line driver |
| Feeding | 5÷30 V |
| Max. consumption. | 120 mA Standard · 180 mA line driver (customizable upon request) |
| Impulses per lap | 1 to 1024 |
| Max frequency. | 60 kHz |
| Protection and environment | |
| axle-side protection | IP53 standard • Sealing (Z): IP64 |
| max. continuous RPM | 6000 standard · 3000 sealed (intermittent: +30 %) |
| Impact resistance | 50 G × 11 ms |
| Vibration resistance | 12 G (10–2000 Hz) |
| Operating temperature | 0 … +60 °C (customizable upon request) |
| Reference | Configuration |
|---|---|
| I/56QJ-500-824-MZ-B-CV-R-02I56QJ500824MZBCVR02 | 500 pulses/revolution · 8 ÷ 24 V · unidirectional with zero · Push-pull PRO · Cable (IP65) · radial output |


Related documentation, cases, and guides
Other products






