DPLVDT-08-xx
LVDT displacement sensor, pencil type, diameter 8 mm, repeatability better than 1 micron, ranges 2.5, 5 and 10 mm.
- Manufacturer: DPF Sensors
- Category: Displacement, SENSORS
LVDT displacement sensor, pencil type, diameter 8 mm, repeatability better than 1 micron, ranges 2.5, 5 and 10 mm.
Using a separate amplifier we can obtain Vcc, mA and RS485 signals.
Stylus with excellent repeatability and measurement stability, rubber bellows protection on a silicon nitride ceramic stylus with high hardness
Properties
Other products
Redundant Angle LVDT | Independent Dual Channel 2 x 60° | IP68 Hermetic Protection | Stainless Steel Housing 7kg | 80.0 mm PCD Flange | 4-20mA / ±10V Outputs | EMI Immunity
Signal duplicator/isolator: 4/20mA (with excitation) and 0/10V (selectable). Potentiometer with two 0/10V or 4/20mA outputs (active/passive). Power supply: 24VDC to 230VAC.
Outdoor Distance Measurement (50 m / ±1 mm / -40…+60ºC / 100 Hz)
Electrochemical sensor | From 1% to 100% | Titanium and Zinc | 4–20 mA, RS485/MODBUS RTU | Up to 10 bar
Inductive (Dual-Frequency) | 4,000 – 5,000 N·m | 15,000 RPM | PCD Flange 155.5 mm
Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power supply required
Wire displacement sensor, ranges from 1000 mm to 4000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection
Salida 10-100mV/g | Frecuencia 2Hz-10kHz | Salida AC Aislada | Temp. -55 a 140°C | Protección IP67 | Acero Inoxidable | Entrada Superior | Base Aislada | Alimentación 15-28V | Cable ETFE