LTFM-120 Flowmeter

Transit time ultrasonic flow meter

The LTFM-120 is a transit time ultrasonic flowmeter designed for non-intrusive measurement of clean liquids in pipelines. This device utilizes transducers that are installed externally in the pipeline, eliminating the need to interrupt the process for installation.

The LTFM-120 is microprocessor controlled, allowing for easy and adaptable programming in the field, offering an economical and efficient solution for flow measurement without the need to interrupt the process.

Properties

  • Speed measuring range: 0.02 to 12 m/s.
  • Precision: Up to 0.5% of the reading.
  • Pipe Size Compatibility: Available with three types of sensors:
    • Type A: for pipes from 20 to 100 mm.
    • Type B: for pipes from 60 to 700 mm.
    • Type C: for pipes from 300 to 3000 mm.
  • Available departures: 4-20 mA, OCT and relay.
  • Communication: RS485.
  • Transducers: Ultrasonic sensors with magnetic fixing and IP68 protection, facilitating their installation in ferromagnetic pipes.
  • Feeding: Wall-mounted electronics with 220 Vac or 10/30 Vdc power supply options.

Other products

In-place inclinometer
MP633 PRESSURE
SPECIAL SOLAR SECTOR
Monitran-Logo
Temp. Máxima 250°C | Sensibilidad 50pC/g | Salida 100mV/g (Amp) | Frecuencia 0.8Hz-12kHz | Cable Integral Alta Temp | Sin Electrónica en Cabezal | Amplificador In-line Necesario | Acero Inoxidable | Protección IP67 | Rango ±80g
NESA Environmental Meters
Biaxial ultrasonic anemometer with no moving parts for measuring wind speed and direction. Range 0-60 m/s, resolution <0.01 m/s, output 4-20 mA or RS485 Modbus.
Logo oficial de ELCIS Encoder, fabricante italiano de encoders incrementales, absolutos y sistemas de medición industrial.
I/58 – Standard Incremental Encoder, Shaft Ø 6×10 mm, Body: Ø 58×56 mm, Pulse range: 1 to 2,540
Temperature and humidity transmitter. For ambient and duct use. Output signal: 4-20 mA, 0-10 VDC, and RS485.
Dimetix_AG-1
Advanced High-Speed, High-Performance Industrial Communication Solution Range: Native IP65 integration with 10/100 Mbit/s transfer
Logo de Pesacam: Sistemas de pesaje para camiones
Weight scale | Wired connectivity | 2/3 high-precision sensors | Manufactured in Bellvei (Tarragona)
LOGO TORQUE CERTIFICATION
Metrología Dual Inductiva | Límite 500 N·m | 21.000 RPM | Brida PCD 84.0 mm | Precisión 0.04% | Inercia 0.0017 kg·m²
Shopping Basket