I/41Q Miniature Incremental Encoder

Budget-friendly price Request a quote
41 mm square flange | Shaft Ø6.35 h7, centered Ø13.89 h7 | 1–2540 imp/rev | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP64 shaft (IP66 sealed) | 60 kHz (100 kHz optional)

The ELCIS 41Q (I/41Q) is a miniature incremental encoder with a 41 mm square flange, anodized aluminum metal housing and holes from Ø3.5 to 35 mm between centers.

It incorporates a front centering protrusion of Ø13.89 h7 and a solid stainless steel shaft of Ø6.35 h7. It supplies from 1 to 2540 pulses per revolution with a standard frequency of 60 kHz (100 kHz option) and is compatible with NPN, PNP, Push-Pull electronics, 26LS31 driver, 88C30 driver and TTL 7404.

It allows axial or radial output options via cable or cable end connectors, with versions available with standard bearings (6000 rpm), IP66 sealed bearings (3000 rpm) or IP53 low torque bearings (12000 rpm).

  • 41 mm square flange: Ø3.5 drills with 35 mm between centers.
  • Stainless steel shaft: solid shaft of Ø6.35 h7 and front centering of Ø13.89 h7.
  • Configurable resolution: from 1 to 2540 pulses per revolution with frequencies of 60 kHz or 100 kHz.
  • Thermal and environmental options: variants for low and high temperature (A), tropicalization and unbreakable disc.

Technical Frequently Asked Questions

What are the flange and mounting dimensions of the I/41Q model?

It has a square flange 41 mm on each side with fixing holes located 35 mm between centers.

What are the shaft and front shoulder dimensions of the I/41Q encoder?

It incorporates a solid stainless steel shaft of Ø6.35 h7 and a front centering protrusion of Ø13.89 h7.

What are the available impulse resolutions?

It provides resolutions ranging from 1 to 2540 pulses per revolution, in unidirectional, bidirectional, bidirectional + zero and unidirectional + zero versions.

Properties

FeatureSpecification
Mechanics
HousingMetallic with 41 mm square flange
Weight120 g
AxisØ6.35 h7 stainless steel (customizable upon request)
max radial/axial load.1 kg
Electric
Exit-side protectionDepending on connection: IP00 or IP65 (see technical sheet)
Feeding5÷30 V (see technical specifications)
Max. consumption.120 mA Standard · 180 mA line driver (customizable upon request)
Impulses per lap1 to 2540
Max frequency.60 kHz (100 option)
Protection and environment
axle-side protectionIP64 standard • IP66 sealed (Z) • IP53 low torque (B)
max. continuous RPM6000 standard · 3000 sealed · 12000 low torque (intermittent: +30 %)
Impact resistance50 G × 11 ms
Vibration resistance12 G (10–2000 Hz)
Operating temperature0 … +70 °C (customizable upon request)
Storage Temp.-30 … +85 °C
ReferenceConfiguration
I/41Q-100-5-BN-CVI41Q1005BNCV100 pulses/revolution · 5 V ±5 % · bidirectional · Driver 26LS31 · 1 m cable · axial / radial · axial output
ELCIS I/41Q miniature incremental encoder
Dimensional drawing of the ELCIS I/41Q miniature incremental encoder

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft H7 Ø6, 8, 10, 12 or 15 | Up to 65536 steps × 4096 turns | SSI with preset, Gray or binary | Optional Sin/Cos 1024 or RS422 16384 ppr | Power supply 10–30 V | IP64 shaft (IP66 sealed) | Elastic coupling
DPF Sensors logo
TSC serial inclinometer
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø59, hollow shaft Ø15 F7 | Elastic coupling | 360, 4096, 8192 or 65536 steps | Parallel, push-pull 20 mA | 10–30 V | IP64 shaft (IP66 sealed) | Gray or binary
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
13-bit SSI, Gray code | Ø 28 mm | 12-bit resolution | Ø 6 mm shaft or press-fit coupling | 5 VDC or 24 VDC | IP54 / IP65 / IP67
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø58 mm, servo, Ø6 f6 shaft | Up to 25 bits in 4096 revolutions | Parallel or parallel with preset | Push-pull 20 mA | 10–30 V power supply | IP64 shaft (IP66 sealed) | Step frequency 200 kHz
DPF Sensors logo
INCLINOMETER RANGE (±) 10°/360°/ To be specified, 1 or 2 axes, PRECISION: ±0.2º, RESOLUTION: 0.1º, special solar sector.
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
PH sensor for range 0 to 13pH with 9m cable Compatible with all controllers on the market
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Wire diameter 0.51 mm | Stroke 1000, 1500 or 2000 mm | Potentiometric output (divider) | Potentiometer 1 kΩ | Linearity ±0.25 % fs | IP50 potentiometer (IP54 mechanical) | Connection length 1 to 5 m
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Stroke 25 … 300 mm | Linearity ±0.05 … ±0.2 % | Repeatability 0.01 mm | Ø 16 mm | IP67 | Cable or connector M8
Monitran-Logo
4-20 mA output proportional to RMS acceleration | Two-wire for PLC, DCS and controllers | 12-32 V DC | 2 Hz to 1 kHz ±10% | Stainless steel | IP67 / IP68 (1187W)
Shopping Basket