Potentiometric transducer with TX2 mounting clamps

Budget-friendly price Request a quote
Voltage divider | Stroke 25 … 300 mm | Linearity ±0.05 … ±0.2 % | Repeatability 0.01 mm | Ø 16 mm | IP67 | Cable or connector M8

Novotechnik TX2 potentiometric transducer. Conductive plastic, with anodized aluminum housing.

Ø 16 mm potentiometric linear position transducer with adjustable mounting clamps. Electrical stroke from 25 to 300 mm. Independent linearity from ±0.05 to ±0.2%, repeatability 0.01 mm, IP67. Double-sealed stem. Connection via radial connector or radial cable.

Key points

  • Housing diameter Ø 16 mm
  • IP67 protection
  • Lifespan of up to 50 million movements (depending on the app)

Technical Frequently Asked Questions

What can be connected to the TX2 potentiometric transducer?

It can be connected to Novotechnik M8 connectors and cables, Novotechnik linear sensor couplings and mountings, process-controlled indicators with MAP display, and signal conditioners with power supply and standard outputs (see their datasheets) MUP and MUK.

How do I order the TX2 potentiometric transducer?

The order code has 6 fields: defined electrical range (mm), protection class, stem, mounting, electrical version, and connection. For example, TX2-0150-717-002-202 (Art. 400037406) is the version with a defined electrical range of 150 mm, IP67 with a single-sided stem, M5 threaded stem, mounting clamps, linearized version, and a 2 m NT standard cable with radial exit. All order references with their corresponding Art. 400037406 are listed in the reference table on this page.

Under what conditions does the TX2 potentiometric transducer operate?

Operating temperature: -40 … +85 °C with connector / -20 … +100 °C with cable. Protection: IP67 (use connector with IP67 or higher).

Properties

FeatureSpecification
Description
HousingAnodized aluminum
MountingMounting clamps; see drawing
StemStainless steel (1.4305), swivel, M5 external thread
BearingSintered bronze bushing
Resistive elementConductive plastic
Cursorprecious metal multi-finger
Electrical connection3-pole M8x1 round connector / 4-wire PUR cable, 4x 0.14 mm², shielded, 2 m
Electrical data
Exit signVoltage divider
Resistance tolerance±20 %
Repeatability0.01 mm
Resolutionbetter than 0.01 mm
Recommended cursor current≤ 1 µA
Maximum cursor current in case of failure10 mA
Maximum permissible applied voltage42 V
Effective temperature coefficient of the output/applied voltage ratiotyp. 5 ppm/K
Insulation resistance (500 VDC)≥ 10 MΩ
Dielectric strength (500 VAC, 50 Hz)≤ 100 µA
Mechanical data
Drive force, horizontal and vertical< 5 N (at 20 °C)
Tearing forcemax. 15 N (*)
Environmental conditions
Working temperature-40 … +85 °C with plug / -20 … +100 °C with cable
Working humidity0 … 95 % HR (non-condensing)
Vibration5 … 2000 Hz, Amax = 0.75 mm, amax = 20 g
Shock50 g, 6 ms
Life> 50 x 10⁶ typical movements.
Maximum working speed5 m/s
DIN EN 60529 protectionIP67 (use a connector with IP67 or higher)
IP67 test conditionsManufacturing state, 1 m water depth, 0.5 h
Stem sealingWear depends on the application and the cycles
ReferenceConfiguration
TX2-0025-717-002-101TX20025717002101Art. 400037301 · Defined range: 25 mm · Connection: M8 connector
TX2-0025-717-002-202TX20025717002202Art. 400037401 · Defined range: 25 mm · Connection: 2 m cable
TX2-0050-717-002-101TX20050717002101Art. 400037302 · Defined range: 50 mm · Connection: M8 connector
TX2-0050-717-002-202TX20050717002202Art. 400037402 · Defined range: 50 mm · Connection: 2 m cable
TX2-0075-717-002-101TX20075717002101Art. 400037303 · Defined range: 75 mm · Connection: M8 connector
TX2-0075-717-002-202TX20075717002202Art. 400037403 · Defined range: 75 mm · Connection: 2 m cable
TX2-0100-717-002-101TX20100717002101Art. 400037304 · Defined range: 100 mm · Connection: M8 connector
TX2-0100-717-002-202TX20100717002202Art. 400037404 · Defined range: 100 mm · Connection: 2 m cable
TX2-0150-717-002-101TX20150717002101Art. 400037306 · Defined range: 150 mm · Connection: M8 connector
TX2-0150-717-002-202TX20150717002202Art. 400037406 · Defined range: 150 mm · Connection: 2 m cable
TX2-0200-717-002-101TX20200717002101Art. 400037308 · Defined range: 200 mm · Connection: M8 connector
TX2-0200-717-002-202TX20200717002202Art. 400037408 · Defined range: 200 mm · Connection: 2 m cable
TX2-0250-717-002-101TX20250717002101Art. 400037309 · Defined range: 250 mm · Connection: M8 connector
TX2-0250-717-002-202TX20250717002202Art. 400037409 · Defined range: 250 mm · Connection: 2 m cable
TX2-0300-717-002-101TX20300717002101Art. 400037310 · Defined range: 300 mm · Connection: M8 connector
TX2-0300-717-002-202TX20300717002202Art. 400037410 · Defined range: 300 mm · Connection: 2 m cable
Novotechnik TX2 potentiometric transducer with mounting clamps
Dimensional drawing of the Novotechnik TX2 potentiometric transducer with mounting clamps

Other products

Monitran-Logo
Side Exit | Ultra-thin Profile (15mm) | Sensitivity 100mV/g | Frequency 2Hz-10kHz | Range ±80g | IEPE Power Supply | Temp. -55 to 140°C | IP67 Protection | Stainless Steel | Integral ETFE Cable
DPF Sensors logo
Portable 2-axis digital inclinometer | ±90° | Accuracy ±0.05° | Resolution 0.01° | Color LCD display | Magnetic mounting | USB | IP54
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft H7 Ø6, 8, 10, 12 or 15 | Up to 65536 steps × 4096 turns | SSI with preset, Gray or binary | Optional Sin/Cos 1024 or RS422 16384 ppr | Power supply 10–30 V | IP64 shaft (IP66 sealed) | Elastic coupling
DPF Sensors logo
Pressure transducer for industrial applications
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Absolute, thread Ø 0.51 mm | Stroke up to 6 m | Resolution 0.1 or 1 mm | DeviceNet | 10–30 V DC | IP64 (IP65 connections) | Linearity ±0.05 % fs.
ATESTEO LOGO, manufacturer of torque sensors
Transverse Inductive Measurement | 500 N·m | 21,000 RPM maximum | Strict PCD flange 84.0 mm | Overall resolution 0.02% | Ultra-low inertia 0.0017 kg·m²
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange □80, centered Ø40 h7 | Shaft Ø10 h7 | 7 to 12 bit (up to 4096 steps) | Parallel, SSI RS422 or analog | 5, 15, 8–24 or 18–28 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
2 cantilever metric casters | Wheels Ø79.8 mm | 1, 10 or 1000 mm/imp | NPN or push-pull | 5 V ±5 % or 12–24 V | IP52 shaft; IP65 wired output | Up to 180 kHz
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
For ultrapure water Cell content K=0.01cm-1 (0.2 to 20µS) Thread 1″ BSP, PVC body material, PT-100 for temperature measurement
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Thread Ø 0.9 mm, 8 m/s | Stroke up to 2000 mm | Incremental, resolution 0.1 or 1 mm | NPN, PNP, push-pull, 1 Vpp | 4–20 mA, 0–10 V or pot. 1kΩ | Power 5, 12, 24 V ±5 % or 8–30 V | IP64 encoder (IP53 mechanical)
Shopping Basket