Single-turn Absolute Encoder A/959C

Budget-friendly price Request a quote
Ø59, hollow shaft Ø15 F7 | Elastic coupling | 360, 4096, 8192 or 65536 steps | Parallel, push-pull 20 mA | 10–30 V | IP64 shaft (IP66 sealed) | Gray or binary

The ELCIS 959C (A/959C) is a single-turn absolute encoder with a hollow shaft and built-in elastic coupling, suitable for general industrial use.

It features optical readout via LED and an IR ASIC photodiode array. It allows selection of 360, 4096, 8192, or 65536 steps per revolution, with a maximum resolution of 16 bits. It outputs the position in Gray code or binary code via a parallel (PP) or preset parallel (P1) interface, with a 20 mA push-pull output stage and a 200 kHz LSB step rate. Options: Q (all stainless steel), W (sealed bearings), and X (custom option).

Constructed with a Ø59 mm aluminum housing and a Ø15 mm F7 hollow stainless steel shaft (Ø8, Ø10, Ø12 or others available upon request), it supports radial loads of 40 N and axial loads of 110 N. It features IP64 protection on the shaft side (IP66 in the sealed version) and operates within a temperature range of -30 to +70 °C.

  • Division accuracy of ±½ LSB (<13 bit) and ±2 LSB (13–16 bit).
  • Starting torque of 50 gcm (90 gcm with sealed bearings) and bearing life of more than 105 h at 1000 rpm.
  • Impact resistance of 30 G (11 ms) already vibrations of 10 G (10–1000 Hz).
  • Consumption of 100 to 400 mA according to the bits, with power from 10–30 V DC.

Technical Frequently Asked Questions

What misalignments does the A/959C elastic coupling allow?

The built-in elastic coupling allows a maximum compensation of ±0.1 mm axial, ±0.2 mm radial and ±1° angular.

What hollow shaft options are available?

The standard diameter is Ø15 mm with F7 tolerance, and shaft options of Ø8, Ø10, Ø12 mm or other diameters are available upon request.

What functions do the PP and P1 interfaces offer?

The PP interface displays the angular value on the output connector in parallel; the number of conductors is proportional to the resolution and the code type. The P1 interface is the same as the PP interface, but with a preset function.

Properties

FeatureSpecification
Mechanics
HousingAluminum, Ø59 mm (customizable upon request)
Weight200 g
AxisStainless steel recess, F7: Ø15 mm standard; Ø8, Ø10, Ø12 or others upon request
Elastic couplingAxial ±0.1 mm · radial ±0.2 mm · angular ±1°
max radial/axial load.40 / 110 N
Electric
Shaft/outlet protectionIP64 shaft (IP66 sealed) · IP65 outlet
Food / Consumption10–30 V DC · 100–400 mA depending on bits
Exit codesGray, Binary
Division accuracy±½ LSB (<13 bit) ±2 LSB (13–16 bit)
Max resolution.16 bit / 1 lap
Steps per lap360 · 4096 · 8192 · 65536
Interface / OutputParallel (PP / P1) · Push-pull 20 mA
Protection and environment
max. continuous RPM6000 standard · 3000 sealed (intermittent: +30 %)
Impact/vibration resistance30 G (11 ms) 10 G (10–1000 Hz)
Operating/storage temperature-30 … +70 °C / -40 … +85 °C
ReferenceConfiguration
A/959C-12-00-15-B-P1-0-CVA959C120015BP10CV4096 steps/rev. · 1 (single revolution) · Standard Ø15 mm shaft · Binary · Parallel + Preset · 1 m axial cable · Up to 25 bits in series · IP65
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
ELCIS A/959C Single-Turn Absolute Encoder
Dimensional drawing of the ELCIS A/959C single-turn absolute encoder

Related documentation, cases, and guides

Other products

NCTE torque sensors.
NCTE Rotary Torque Sensor | 2000/2200 Series | 500Nm | 1,000-5,000 RPM
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
IO-Link | Ø 36 mm | 16 bits per revolution | Shaft Ø 6 mm, Ø 10 mm or hollow Ø 6 mm | 24 VDC (16 … 30 VDC) | IP67 / IP69K | Measuring range: 44 revolutions (15840°)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Potentiometric output | Stroke 50 … 750 mm | Linearity ±0.04 … ±0.2 % | Resolution < 0.01 mm | 42 VDC max. | IP65 | M12 connector or cable
ATESTEO LOGO, manufacturer of torque sensors
Strain Gauges (DMS) | 50 – 10,000 N·m | Stationary Standard | PCD Flanges 84.0 – 196.0 mm
Wall humidity and temperature sensor
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø58 mm, servo, Ø10 h8 shaft | Up to 25 bits in 4096 revolutions | Parallel or parallel with preset | Push-pull 20 mA | 10–30 V power supply | IP64 shaft (IP66 sealed) | Step frequency 200 kHz
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo flange Ø44 mm, shaft Ø6 h7 | 8 to 2048 bpm/rotation | Line driver 26LS31/ET7272, NPN | Power supply 5, 8–24, 18–28, 10–30, 5–30 V | IP66 shaft (IP53 with low torque) | 12000 rpm with low torque (option B) | Impacts 100 G (6 ms)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage, current, or ratiometric output | Ø 28 mm | 16-bit resolution | Ø 6 mm shaft or press-fit coupling | 5 VDC or 24 VDC | IP54 / IP65 / IP67 | 2 to 16 turns (up to 5760°)
NESA Environmental Meters
0-2Vdc · 4-20mA · RS485 / Modbus | Dry / Wet: 0-100% | Accuracy ±0.5% | Surface 28cm² | Time constant 2 s | -30 ÷ +60°C | Sensing area 50×70 mm
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Graphite Sensor with built-in PT-100, 3m Cable, K=1 cm⁻1 Range from 2MicroSiemens to 2,000 milliSiemens,
Shopping Basket