Accelerometer with 4-20 mA output Monitran MTN/1187

Budget-friendly price Request a quote
4-20 mA output proportional to RMS acceleration | Two-wire for PLC, DCS and controllers | 12-32 V DC | 2 Hz to 1 kHz ±10% | Stainless steel | IP67 / IP68 (1187W)

The Monitran MTN/1187 is a general-purpose, top-entry accelerometer with a proportional DC output: 4-20 mA two-wire output proportional to the sensor range (rms acceleration, g rms). It can be directly connected to PLCs, DCSs, and other industrial controllers. It is constructed entirely of stainless steel for continuous vibration monitoring in harsh environments.

The series has three variants: MTN/1187 with an integrated 62GB 3-pin connector (IP67), MTN/1187C with an integrated ETFE cable with stainless steel overbraiding (IP67), and the fully submersible MTN/1187W with an integrated heavy-duty polyurethane cable (IP68). Ranges from 0-1 to 0-20 g rms. Guemisa is the official distributor of Monitran in Spain.

Key points

  • 4-20 mA output proportional to RMS acceleration, two-wire, with 12-32 V DC power supply
  • Ranges of 0-1, 0-2, 0-5, 0-10 and 0-20 g rms; frequency response of 2 Hz to 1 kHz ±10%
  • Dynamic range of 50 g peak, transverse sensitivity less than 5% and temperature sensitivity of 0.08%/°C

Technical Frequently Asked Questions

What output does the Monitran MTN/1187 provide and how is it powered?

A 4-20 mA DC two-wire output proportional to rms acceleration (g rms), powered by 12-32 V DC; connects directly to PLC, DCS and other industrial controllers.

What is the difference between the MTN/1187, the MTN/1187C and the MTN/1187W?

They all share the same electronics and specifications. The MTN/1187 has an integrated 62GB 3-pin connector (IP67); the MTN/1187C, an integrated ETFE cable with stainless steel overbraiding (IP67, 5 m standard and 100 m maximum); the MTN/1187W is fully submersible, with an integrated polyurethane cable (IP68, up to 100 m depth, 10 bar). All three weigh 150 g.

What acceleration ranges are there and how are they indicated in the reference?

The suffix xx in the reference indicates the acceleration range: 0-1, 0-2, 0-5, 0-10, or 0-20 g rms. The frequency response is 2 Hz to 1 kHz ±10%, and the dynamic range is 50 g peak.

Properties

FeatureSpecification
Measure and signal
Exit4-20 mA DC proportional to the rms acceleration (g rms), two-wire
Measurement ranges0-1, 0-2, 0-5, 0-10 and 0-20 g rms
Frequency response2 Hz to 1 kHz ±10%
Mounted base resonance5 kHz (nominal)
Dynamic range50g peak
Cross-sectional sensitivityLess than 5%
Temperature sensitivity0.08%/°C
IsolationIsolated base
Food and environment
Feeding12-32 V DC (4-20 mA)
Operating temperature-25 to 90 °C
SealedIP67 (MTN/1187 and MTN/1187C); IP68 (MTN/1187W)
Immersion depth (MTN/1187W)100 m max. (10 bar)
Housing materialStainless steel
Mechanics and connection
Connection (MTN/1187)62GB 3-pin integral connector: pin A+, pin B not connected, pin C 0V; MTN/MH008 mating connector
Connection (MTN/1187C)ETFE integral cable with stainless steel overbraiding: white +, display*, black 0 V; standard length 5 m, maximum 100 m
Connection (MTN/1187W)Integral polyurethane cable: red +, screen*, blue 0 V; maximum length 100 m
Mounting¼" UNF female or Q/F female
Tightening torque8 Nm
Dimensions (according to plan)Ø27.0mm; 28 mm between faces; height 57.0 mm (MTN/1187), 43.0 mm (MTN/1187C, without cable), 75.0 mm (MTN/1187W, without cable)
Weight150 g (nominal)
ReferenceConfiguration
MTN/1187-xx MTN1187XXVariant: MTN/1187 · Mounting: ¼" UNF female · Integral 62GB 3-pin connector · xx = optional acceleration (0-1, 0-2, 0-5, 0-10 or 0-20 g rms) Technical data sheet MTN/1187 (PDF)
MTN/1187C-xx MTN1187CXXVariant: MTN/1187C · Mounting: ¼" UNF female · Integral ETFE cable · xx = optional acceleration (0-1, 0-2, 0-5, 0-10 or 0-20 g rms) Technical data sheet MTN/1187C (PDF)
MTN/1187CQ-xx MTN1187CQXXVariant: MTN/1187C · Mounting: Q/F female · Integral ETFE cable · xx = optional acceleration (0-1, 0-2, 0-5, 0-10 or 0-20 g rms) Technical data sheet MTN/1187C (PDF)
MTN/1187Q-xx MTN1187QXXVariant: MTN/1187 · Mounting: Q/F female · Integral 62GB 3-pin connector · xx = optional acceleration (0-1, 0-2, 0-5, 0-10 or 0-20 g rms) Technical data sheet MTN/1187 (PDF)
MTN/1187W-xx MTN1187WXXVariant: MTN/1187W · Mounting: ¼" UNF female · Integral polyurethane cable, submersible · xx = optional acceleration (0-1, 0-2, 0-5, 0-10 or 0-20 g rms) Technical data sheet MTN/1187W (PDF)
MTN/1187WQ-xx MTN1187WQXXVariant: MTN/1187W · Mounting: Q/F female · Integral polyurethane cable, submersible · xx = optional acceleration (0-1, 0-2, 0-5, 0-10 or 0-20 g rms) Technical data sheet MTN/1187W (PDF)
Accelerometer with 4-20 mA output Monitran MTN/1187
Monitran MTN/1187 accelerometer dimension drawing: 57.0 mm high, Ø27.0 mm, 28 mm between faces

Other products

DPF Sensors logo
FLOAT LEVEL SWITCH
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø58 mm, servo, Ø6 h7 shaft | Up to 65536 steps × 4096 revolutions | SSI with preset, Gray or binary | Optional Sin/Cos 1024 or RS422 16384 ppr | 10–30 V power supply | IP64 shaft (IP66 sealed) | Optional shaft diameters: Ø5, 8, 9, 52, 10 or 12
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Ø 28 mm | Shaft Ø 6 mm or push-in coupling | Max. Ub 42 VDC | IP54 or IP65 | 100° to 345°, 1 or 2 channels
DPF Sensors logo
Temperature and humidity transmitter. For ambient and duct use. Output signal: 4-20 mA, 0-10 VDC, and RS485.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange 63 mm, shaft Ø9.52 h7 | Up to 2²⁴ steps in 4096 turns | Gray or binary | Parallel NPN 70 mA or SSI RS422 | Power supply 5 ±5 %, 8–24 or 18–28 V | IP64 shaft (IP65 sealed) | Max. radial/axial load 8 kg
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Current output 4 … 20 mA | Ø 79 mm | 12-bit resolution | Spindle Ø 13 mm or Ø 10 mm | 12/24 VDC (8 … 34 VDC) | IP67 / IP69K | 60° to 360°, 1 or 2 channels
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø40 mm | Solid shaft Ø6 mm (Ø8 optional) | 10–2500 impedances/revolution | NPN, push-pull, line driver | 5 V ±5 % or 12–24 V | IP52 shaft (IP65 output with cable) | Max. frequency 180 kHz
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Turbidity sensor for continuous measurement in pipes, with nephelometric method ISO 7027 and selectable ranges of 0–4, 0–40, 0–400 and 0–4000 NTU.
ATESTEO LOGO, manufacturer of torque sensors
Contactless Transmission | 5 – 20 N·m | 20,000 RPM | Shaft-to-Shaft Coupling
Differential pressure switch for air
Shopping Basket