TSC-2X
TSC serial inclinometer
- Manufacturer: DPF Sensors
- Category: Inclinometers, SENSORS
Small volume dual-axis tilt sensor.
Properties
Range: (±) 10°/30°/60°/90°/ specify
Axles: 1 or 2
Power supply 9…36 Vdc
IP67,
Working temp. -40…+85ºC
MTBF 10 years
SOutput signal 0-5 Vdc. / 4…20 mA
RS232 / RS485
Precision: ±0.02º
Repetitive: ±0.05º
Other products
Universal sinusoidal AC current isolator 0/1A, 0/5A, 0/10A (AC). Multiple output: 0/20mA or 4/20mA (Active/Passive), 0/10V, intermediate and REVERSE values. Dual power supply: 24VDC -115/230VAC.
Industrial pH electrode with S8 connector and PG13.5 thread compatible with Crison, Hach, Omega and Mettler Toledo
I/55 – Standard Incremental Encoder, Shaft Ø 6×10 mm, Body: Ø 55×56 mm, Pulse range: 1 to 2,540
Linear Range 0-5mm | Sensitivity 4mV/µm | AISI 4140 Stainless Steel | Probe -30 to 180°C | Driver -20 to 80°C | M16 x 1 Thread | Frequency DC-10kHz | Linearity <1% | PEEK Tip | PTFE Cable
Combined glass/gel reference pH electrode, epoxy body, size 75x12. with 1.5m BNC cable.
Tilt sensor for platform control, on 1 or 2 axes, programmable alarm range, range +-15º, accuracy 0.1º, 1Amp contact, NC or NO, 24 VDC power supply, IP67
Relay Output | Adjustable Alarm Limit | Configurable Time Delay | IP67 Protection | Robust Aluminum Housing | Remote Reset | 24V DC/AC Power Supply | Temperature -20 to 80°C | Surface Mounting
Power supply 5V | Shaft Ø75÷125mm | Push-Pull output | IP65 protection | Weight 8.45kg | Load 20kg | Bearing life 1.5×10^9 rev | Frequency 100kHz | Pulses 2300PPR | Temperature -30÷85°C
Level float for automatic filling and emptying control
DC/DC converter power supply.