DS1 / DS2
Differential pressure switch for air
Dirt in filters or fans, pressurized rooms, flow.
Properties
 | ±20 to 300 pa /±1 Kpa to 5 Kpa |
|---|---|
| -30…85°C medium temperature |
| 5.00 % precision |
| Switched contact |
| Differential pressure. |
| Pipe 3.5mm |
Other products
Incremental Encoder for Motors I/59P | Anodized Aluminum Body | Valox 420 Cover | Hollow Shaft Ø 6–10 mm | Maximum Load 6 kg | IP65/IP66 Protection | Continuous RPM 3000 | Starting Torque > 50 g·cm | Bearing Life 1.5 x 10⁹ revs | Temperature 0–70 °C
Passive Inductive | Range 5 to 15 mm | M12x1 Threaded Housing | Infinite Resolution | IP67 | External Analog Output
Top Output | Ultra-Slim Body (15mm) | Sensitivity 100mV/g | Frequency 2Hz-10kHz | Range ±80g | IEPE Power Supply | Temp. -55 to 140°C | IP67 Protection | Stainless Steel | 2-pin Connector Mil-C-5015
CO2, humidity and temperature sensor, for OUTDOORS, with ModBus RS485 communication
Conductivity range from 0 to 20 mS/cm. Output 4/20mA
Power supply: 5V DC | Shaft diameter: 11mm Stainless Steel | Weight: 2800g | Maximum load: 10kg | Output: Push-Pull | Protection: IP65 | Bearing life: 1.5×10^9 Revs | Temperature: 0 to 70°C | Maximum frequency: 60kHz | Light source: LED
PH sensor for range 0 to 13pH with 9m cable Compatible with all controllers on the market
Accelerometer with 3 axes, the output signal can be in mA, Vcc and RS485 communication
Stainless steel pinion | Anodized aluminum base | Weight 1800g | Radial load 4kg | Bearing life 1.5×10^9 revs | Impact resistance 50G | Temperature 0-70°C | Pulses/rev 1-10000 | Max frequency 60kHz | IP65 output