DFI420 – 2-axis digital inclinometer ±90°

The DFI420 uses electronic technology of
Angular measurement to determine the inclination
in two directions. The values can be displayed
directly on screen, making verification easier
of the longitudinal and transverse orientation
of a surface.

Its internal processing incorporates
axle offset,
which helps reduce cross-influence during
measurement, as well as temperature compensation
to improve the stability of the readings
under different working conditions.

With a range of ±90° and resolution
of 0,01°, allows measuring from
small leveling deviations up to
wide angular inclinations.

The DFI420 inclinometer incorporates several functions
to facilitate leveling work
and angular verification:

• ABS (absolute measurement):
  visualization of the tilt with respect to
  to the instrument reference.
• RELA (relative measurement):
  reading angular differences taking
  as a reference to a previously established position.
• ZERO:
  establishing the measurement reference
  to perform relevant checks.
• HOLD:
  Temporary freezing of the value displayed on the screen.
• Degrees and mm/m:
  visualization of the angle or slope
  expressed as a difference in elevation per meter.

The device incorporates adjustment functions
zero and guided angular calibration
from the instrument itself.

He DFI420 features magnetic mounting,
which facilitates its placement on surfaces
ferromagnetic metals during operations
assembly, leveling and maintenance.

The casing design allows the use of
lateral and lower reference surfaces,
facilitating measurements in different
guidelines.

Its compact format, approximately
83 × 53 × 19.2 mm, and weight of
125 g allow it to be transported
and use it directly on the machine
or structure that needs to be checked.

The DFI420 integrates a color LCD screen
with a visible area of 40 × 32 mm, which allows
consult the angular measurements and modes
operating directly on the instrument.

Feeding is done through a
3.7V rechargeable lithium battery.
The indicated charging time is approximately
3 hours, with a standby autonomy of up to
10 hours.

The 5-pin USB interface allows charging
battery life and features functionality
data transmission.

The device uses an aluminum alloy casing,
IP54 protection and withstands temperatures of
functioning of -10 to +70 °C.

Machinery leveling

Checking the tilt of the machine beds,
tables, frames and reference surfaces
during installation or maintenance.

Mechanical alignment and assembly

Measurement of angular differences between
components and position verification
during adjustment operations.

Checking outstanding items

Measuring the slope of surfaces
and structures, with the possibility of representing
the slope in mm/m.

Pipe and platform installation

Orientation and slope verification
during assembly and installation work.

Equipment maintenance and control

Periodic angle checks
and verification of the position of elements
mechanical and industrial installations.

He DFI420 has an angular accuracy
of ±0.05°, resolution of 0.01°
and repeatability of 0.05°.
The resolution represents the increase
angular viewable and should not be confused
with the precision of measurement.

Yes. The DFI420 has measurement capabilities.
ABS/REL. Using the ZERO function
An initial reference can be established
and subsequently measure the differences
angular relative to that position.

It has magnetic attachment
and reference surfaces to facilitate
placement on metal parts
ferromagnetic during measurements.

It does not require a continuous external power supply.
to function as a portable instrument.
It integrates a rechargeable lithium battery.
3.7V and USB connection for charging.