DFIxxx

Analog-digital CO2 Controller Sensor, with ModBus RS485 communication, for OUTDOORS

Quadrupler – potentiometer signal isolator, potentiometer input, isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated

Linear Range 0-2mm | Sensitivity 8mV/µm | AISI 4140 Stainless Steel | Frequency DC-10kHz | Linearity 1% | Probe -30 to 180°C | Driver -20 to 80°C | Impedance <50Ω | PEEK Tip | PTFE Cable

Driving Telemetry | Stepped Range 50 – 400 N·m | Class Accuracy ±0.10% | Analog Output ±10V | 16-Bit Resolution

Inductive (Dual-Frequency) | 50 N·m – 500 N·m | 30,000 RPM | PCD flange 101.5 mm

Inductive Telemetry | 100 N·m | 25,000 RPM | PCD Flange 101.5 mm | Inertia 0.00350 kg·m²

Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20 mA active, Power supply: 24VDC (20.. 30V) isolated

4-20mA DC Output | Range 0-10 to 0-100 mm/s | RMS Speed Measurement | Frequency 2Hz-1kHz | Power Supply 12-32V DC | Temperature -25 to 90°C | IP67 Protection | Stainless Steel | Insulated Base | Configurable Connection

For ultrapure water Cell content K=0.01cm-1 (0.2 to 20µS) Thread 1″ BSP, PVC body material, PT-100 for temperature measurement

Temperature and humidity transmitter. For ambient and duct use. Output signal: 4-20 mA, 0-10 VDC, and RS485.