Support arms for SS1, SS2 and SS3 sensors
Budget-friendly price Request a quote
Support arms | 50, 90 and 150 cm | Ø 25 mm | Post Ø max. 80 mm | Anodized aluminum | Pole or wall mounted
- Manufacturer: Nesa
- Category: NESA Accessories, Sensor accessories, SENSORS
NESA's SS1, SS2 and SS3 are support arms for sensors, for pole or wall mounting, with a diameter of 25 mm and available in lengths of 50 cm, 90 cm and 150 cm.
Each arm has a clamp for attaching the NESA sensors and a second clamp of variable diameter for attaching to poles with a maximum diameter of 80 mm. They are made of silver anodized anti-corrosion aluminum.
Key points
- Support arms for sensors, pole or wall mounted
- SS1 of 50 cm, SS2 of 150 cm and SS3 of 90 cm
- Clamp for securing NESA sensors
- Second clamp of variable diameter, for posts of max. Ø 80 mm
- Silver anodized anti-corrosion aluminum, Ø 25 mm
Technical Frequently Asked Questions
What are SS1, SS2, and SS3?
Support arms for NESA sensors, for pole or wall mounting, in lengths of 50 cm, 90 cm and 150 cm.
What diameters do they have?
The arms are Ø 25 mm and the second clamp, of variable diameter, accepts posts of max. Ø 80 mm.
What material are they made of?
Made of anti-corrosion anodized silver aluminum.
Properties
| Feature | Specification |
|---|---|
| Support arms | |
| Product type | Support arms for sensors |
| SS1 Length | 50 cm |
| SS2 Length | 150 cm |
| SS3 Length | 90 cm |
| Diameter | Ø 25 mm |
| Material | Silver anodized anti-corrosion aluminum |
| Subjection | |
| Sensor mounting | Clamp for securing the sensors |
| Second gag | Variable diameter |
| Post mounting | Max. diameter 80 mm |
| Support for | Pole or wall-mounted sensors |

Related documentation, cases, and guides
Other products

Shaft Ø9.52 h7 | Square flange 63.5 mm | 1 to 1024 imp/rev | NPN, push-pull or line driver | Power supply 5–30 V | IP54 shaft (IP65 Z seal) | Max. frequency 60 kHz

Electrochemical Technology | VARIVENT® Connection | -10 °C to +150 °C (SIP) | Stainless Steel and PEEK

Long-range industrial laser sensor (100 m without reflector / 500 m with reflector / ±3 mm / 250 Hz)

Housing Ø90 mm, hollow shaft H7 | Torque or pivot support | 100 to 2048 imp/rev | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP65 shaft (IP66 sealed) | High MTTFd (EN ISO 13849-1)

Dual shaft Ø6 mm, servo flange | Front centering Ø31.75 h7 | 1 to 10000 imp/v | NPN, PNP, push-pull or line driver | 5–30 V | IP64 shaft (IP65 sealed) | 100 kHz (300 kHz optional)

Housing Ø68, spindle Ø6 h7 | Up to 2048 steps (11 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP64 spindle (IP66 sealed) | Gray, Binary, Excess or BCD

Square flange 63, shaft Ø9.52 h7 | SSI with preset, RS422 | Up to 65536 steps (16 bits) | Gray or binary programmable | 10–30 V | IP65 shaft (IP66 sealed) | Optional Sin/Cos 1024 or RS422 16384 ppr

Incremental output | Ø80 mm control | 100 pulses/revolution with latching | NPN outputs and 26LS31 driver | 5 V or 15–24 V power supply | IP50 shaft side | Phoenix MS (IP00) axial terminals

Square flange □80, shaft Ø8 h7 | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP65 shaft (IP66 sealed) | Gray, Binary, Excess or BCD

Para sensores de las series 2200 y 2285 | Conector Lumberg de 4 pines a extremos libres | Cable de ETFE apantallado de dos conductores con sobremalla | 5 m