B&C SI262 Submersible ORP Sensor

Budget-friendly price Request a quote
ORP probe by immersion in PVC tube. Length 720 mm. With SZ265 probe

The B&C Electronics SI262 submersible sensor measures the oxidation-reduction potential (ORP) in submerged environments. It features a 720 mm long PVC tube immersion probe and an SZ265 ORP probe. Other probe models are available upon request.

The probe consists of:
– Electrode holder with extension for immersion measurement;
– 12 mm diameter combined pH or ORP electrode.

The electrode has a 9-meter sealed coaxial cable and connects directly to the instrument without an extension. The probe holder is made of PVC (other materials available upon request). Maximum temperature: 40°C when using the PVC tube. Immersion depth: adjustable. Suggested extension cable: SZ 9215.
The pH or ORP electrode is protected by a shield where the SZ901 accessory can be installed for automatic electrode cleaning.
The electrode holder is completed with an extension tube screwed onto the top.
A movable ring is installed on the tube to regulate the immersion depth.
To extend the cable, the top cover can be replaced by the SZ740 junction box (IP65), with terminal block.
Between the top plug or the SZ740 and the extension tube, a rubber gasket is mounted that holds the cable (diameter 2.5 mm) and seals the probe.

Properties

Electrode diameter: 12 mm
Probe holder length: Depending on the model (see image)
Diameter: 34 mm
Material: PVC (other on request)
Temperature: 40°C max. (If PVC pipe is used)
Diving depth: adjustable
Suggested cable: SZ 9215 (for extension)

B&C Electronics PH and ORP probe holder Models SI161_SI181_SI262_SI263
B&C Electronics PH and ORP probe holder Models SI161_SI181_SI262_SI263

Other products

B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
ORP probe by immersion in PVC tube. Length 720 mm. With SZ275 probe
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
pH probe for immersion in PVC tube. Length 1170 mm.
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
pH probe for immersion in PVC tube. Length 720 mm.
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Industrial pH electrode, 0–12 pH, double PTFE junction, polymer gel, PVDF body, DL connection and 3/4″ NPT mounting. Up to 100 °C and 10 bar.
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Industrial pH electrode with integrated Pt100, double PTFE junction, PVDF body and 4-pin connector. 0–14 pH.
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Antimony combined reference pH electrode with epoxy body, size 75x12. with 9m cable for the galvanic industry.
NESA Environmental Meters
6 real-time parameters | RS485 or USB (with IS485/USB module) | pH 0÷14 | Level 0÷20 m / 0÷50 m | -5 ÷ +60°C | 10.8 ÷ 16Vdc | 512 x 70 mm
NESA Environmental Meters
4 default parameters | pH 0÷14 | Level 0÷20 m | -5 ÷ +60 °C | RS485 | 10.8 ÷ 16Vdc | 512×42mm
NESA Environmental Meters
Up to 3 simultaneous ions | Depth 0.2 ÷ 20 m | Electrodes with ±1100mV output | RS485 | 12 Vdc (10.8 ÷ 16Vdc) | 500×42 mm (L x D) | PVC
SI 31012 conductivity probe (4 electrodes) with Pt100 – DN40 DIN 11851-52 – 5 m cable
Shopping Basket