B&C SZ1075 pH Sensor
Antimony combined reference pH electrode with epoxy body, size 75x12. with 9m cable for the galvanic industry.
- Manufacturer: B&C Electronics
- Category: Water quality, SENSORS, pH and Redox Probes
The B&C Electronics SZ1075 pH sensor is a pH electrode, designed for use in the galvanic industry. It is compatible with all pH controllers on the market and for all types of stable processes. It provides reliable measurements even at the extremes of the pH range.
This pH electrode allows for precise measurement at an extraordinary cost. Its bulb is constructed of extra-hard glass, while the body is made of epoxy for added protection.
It is ideal for measuring pH where liquids contain fluorides, for measuring pH in galvanic baths.
Properties
- Measuring range: 2 to 11 pH
- Temperature range: -5 to 100 °C
- Body material: Epoxy
- Size: 75X12
- Maximum pressure: up to 8 bars
- Connector: 1.5m cable with BNC connector
- Dimensions: 110 mm in length and 12 mm in diameter
- Application: Measurement in swimming pools and spas
- Zero Point: pH 7
- Accuracy: ± 0.03 pH unit
- Response time: < 10 seconds (95% response)
- pH electrode solution: pH buffer with added chloride
- Reference type: Annular ceramic, sealed
- External reference electrode solution: Polysaccharide gel, 4M KCI with AgCI
Other products
Wind direction sensor for industrial use, with 4-20 mA output signal
Extra Large Laser Reflection Sheet for Structural Customization Range: Extended extreme measurement scalability up to 500 meters
Housing Ø50 mm | Shaft Ø 4 mm / 5 / 8 mm Stainless Steel | Operating Temp. 0 – +70 °C | Resolution 2 to 8 bits (4 to 256 positions) | Max. Load 2 Kg | Max. Frequency 50 kHz | Weight 220 g | Vibration 12 G (10 – 2000 Hz) | Impacts 50 G x 11 ms | Power Supply 5V | Protection IP65 | Life 1.5×10^9 Rev
NCTE Rotary Torque Sensor | 2300 Series | 100Nm | 10,000 RPM
High-Speed Communication (500 Hz / 2 ms) with IP65 Industrial Protection: Synchronous Real-Time Data Transfer for Critical Processes
Combined pH electrode with glass body, double ring junction, 0–13 pH range and 1.5 m cable with BNC connector.
Vibrating wire piezometer for pore pressure (interstitial water pressure) and groundwater level | Ranges 0.2 to 10 MPa | Accuracy ±0.25 % FS
General Purpose | Stainless Steel | TNC Connector | Sensitivity 100mV/g | Frequency 2Hz-13kHz | Non-Insulated Base | IP65 Protection | Range ±80g | Weight 52g | Temp. -25 to 120°C