Sensor de par de eje DST ATESTEO

Budget-friendly price Request a quote
5 · 10 · 20 N·m | Clase 0,05 a 0,10 % | 20 000 rpm | Frecuencia, tensión

El transductor de par de eje ATESTEO DST es un transductor de par rotativo de eje para pares bajos de 5 a 20 N·m, con clase de precisión 0,05 a 0,10 % y velocidad máxima de 20 000 rpm. Salidas: frecuencia, tensión.

El DST es un transductor de eje con estator montado sobre rodamientos y electrónica integrada (no necesita unidad de evaluación aparte). Lleva medida óptica de velocidad integrada (60 impulsos por vuelta) y salidas de frecuencia y tensión.

It is delivered calibrated in ATESTEO's calibration laboratory, with DAkkS accredited calibration according to DIN 51309 available as an option. ATESTEO develops and manufactures the mechanics and electronics of its transducers in Germany and uses them in more than 200 of its own test benches worldwide. Guemisa is ATESTEO's distributor in Spain: we help you choose the model and size and prepare a quote, including calibration costs.

Key points

  • Pares nominales: 5 · 10 · 20 N·m
  • Clase de precisión 0,05 a 0,10 % (salidas de frecuencia y CAN)
  • Velocidad máxima 20 000 rpm
  • Rotor Ø15 mm · longitud 83 mm
  • Salidas: frecuencia, tensión
  • Temperatura de servicio -10 a 70 °C · IP42

Technical Frequently Asked Questions

¿Qué rango del DST elijo?

5, 10 o 20 N·m: elija el más próximo por encima del par máximo. El de 5 N·m tiene clase 0,10 % y los de 10 y 20 N·m, clase 0,05 %.

¿Necesita unidad de evaluación?

No: la electrónica va integrada y da salida de frecuencia (RS422) y de tensión, además de la medida óptica de velocidad (60 impulsos por vuelta).

¿Cómo se monta?

Es un transductor de eje con estator sobre rodamientos: se intercala en la línea de transmisión con acoplamientos en sus dos extremos de eje.

Properties

FeatureSpecification
Extent
Nominal pairs5 · 10 · 20 N·m
Accuracy class≤±0,05 a ≤±0,10 % según tamaño
DeparturesFrecuencia, tensión
Linearity deviation with hysteresis (60-100%, frequency)≤±0,050 %
Speed
Maximum speed20 000 rpm
Integrated speed measurementoptics
Optional speed measurementNo
Mechanics
Rotor outer diameter15 mm
Rotor length (without centering)83 mm
Limiting torque (referring to the nominal torque)250 a 500 % según tamaño
Approximate breaking torque (referred to nominal torque)500 a 1000 % según tamaño
Torsional stiffness2,30 a 4,80 kNm/rad según tamaño
Rotor moment of inertia0,0000039 a 0,0000040 kgm² según tamaño
Degree of balance (DIN ISO 1940)G6,3
Rotor weight0,1 kg
Environment and food
Operating temperature (stator)-10 a 70 °C
Degree of protection (rotor)IP42
Degree of protection (stator)IP42
Feeding24 V DC
Power supply range12 a 26 V DC
Evaluation unitIntegrated
Configuration interfaceUSB (UART)

Values from the current ATESTEO technical data sheet. Details by size (linearity, drift, stiffness, load limits and plans) are in the technical data sheet in Spanish.

ReferenceConfiguration
1000423410004234ATESTEO DST · par nominal 5 N·m
1000423610004236ATESTEO DST · par nominal 20 N·m
1000423710004237ATESTEO DST · par nominal 10 N·m
Transductor de par de eje ATESTEO DST
Plano de dimensiones del transductor de par de eje ATESTEO DST

Other products

ATESTEO LOGO, manufacturer of torque sensors
5000 N·m · 10 kN·m | Clase 0,02 % | 12 000 rpm (14 000 opc.) | Rotor Ø230 mm | Taladros 196,0 mm | RS422, tensión, bus CAN
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø16 mm | Interchangeable with Ø98 mm tachometers | 1 to 2540 pulses/revolution | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP64 shaft (IP66 sealed) | Self-adjusting coupling
ATESTEO LOGO, manufacturer of torque sensors
200 · 500 · 1000 · 1500 · 2000 · 2500 · 3000 N·m | Clase 0,05 % | 20 000 rpm (25 000 opc.) | Rotor Ø150 mm | Taladros 130,0 mm | Frecuencia, tensión, corriente, bus CAN
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø10 H7, optional Ø6, 8 or 9.52 | Up to 65536 steps × 16384 revolutions | SSI (RS422), optional preset | 10–30 V power supply | IP65 shaft (IP66 sealed) | Star coupling, ±3 mm ax. | Gray code or binary
Dimetix_AG-1
Industrial laser sensor for measuring up to ~100 m directly on natural surfaces and up to 150 m with reflector, with ±1 mm @2σ and up to 100 Hz.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
16-tooth pinion, Ø38 mm housing | Linear resolution 0.005 to 1 mm | 50 to 2500 pulses/revolution | Push-pull or line driver | Power supply 5 V ±5 % or 12–24 V | IP54 shaft side | With integrated pinion preload
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Current output 4 … 20 mA | Ø 69 mm | 12-bit resolution | Shaftless: magnetic position marker | 12/24 VDC (9 … 34 VDC) | IP67 / IP69K | 60° to 360°, 1 or 2 channels
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Magnetostrictive | Stroke 50 … 4250 mm | SSI 24 and 25 bit | Resolution 1, 5 or 10 µm | Linearity ≤ ±25 … ±120 µm | 13 … 34 VDC | IP67 / IP68
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange 63 mm, shaft Ø9.52 h7 | Up to 2²⁴ steps in 4096 turns | Gray or binary | Parallel NPN 70 mA or SSI RS422 | Power supply 5 ±5 %, 8–24 or 18–28 V | IP64 shaft (IP65 sealed) | Max. radial/axial load 8 kg
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental output | Servo flange type | 100 impedances/revolution with latching | 1–2500 impedances/revolution (option F) | NPN, PNP, push-pull, driver | Power supply 5–30 V depending on version | IP65 shaft side (output IP00–IP67)
Shopping Basket