Incremental Encoder for Racks I/38CR

Budget-friendly price Request a quote
16-tooth pinion, Ø38 mm housing | Linear resolution 0.005 to 1 mm | 50 to 2500 pulses/revolution | Push-pull or line driver | Power supply 5 V ±5 % or 12–24 V | IP54 shaft side | With integrated pinion preload

The ELCIS 38CR (I/38CR) is a 38 mm diameter incremental encoder with an integrated preload pinion, delivering 50 to 2500 pulses per revolution. It is used with racks or the CRP linear transducer for linear dimension measurement, with a resolution of 0.005 to 1 mm.

The I/38CR offers 50 to 2500 pulses per revolution, a maximum frequency of 100 kHz (160 kHz optional), and push-pull or line driver electronics (the latter only at 5 V). It is powered by 5 V ±5 % or 12–24 V.

It supports 0.5 kg of radial/axial load, works from -10 to +70 °C with IP54 protection on the shaft side and connects by cable (IP65), by 9-pin connector (IP64) or with a cable end connector (IP65).

  • For racks or CRP linear transducers, with integrated pinion preload system.
  • Resolution of 0.005 to 1 mm and of 50 to 2500 pulses per lap, with a frequency of up to 100 kHz (160 kHz optional).
  • Push-pull electronics or line driver (5V only), powered by 5 V or of 12 to 24 V.
  • Until 5000 rpm continuous, with a maximum radial/axial load of 0.5 kg.

Technical Frequently Asked Questions

What pinion and what connections does the I/38CR offer?

16-tooth pinion (C); 1 m cable (CVC), 9-pin sub-D connector (CD) or cable end connector.

What output electronics does it support?

Push-pull (H) and line driver (N, 5 V only).

What foods does it support?

5 V ±5 % (code 5) and 12–24 V (code 1224).

Properties

FeatureSpecification
Mechanics
HousingØ38 mm
Base / lidAluminum / Steel
Weight230 g
PinionStainless steel, 16 teeth, with integrated preload system
max radial/axial load.0,5 kg
Electric
Linear resolution0.005 to 1 mm
Exit-side protectionCVC and cable end connector: IP65; CD: IP64; terminal box: IP00
Feeding5–24 V according to version
Max. consumption.120 mA
Impulses per lap50 to 2500
Max frequency.100 kHz (160 kHz optional)
Protection and environment
axle-side protectionIP54 standard (without sealing or low torque options)
max. continuous RPM5000 (intermittent: +30 %)
Impact/vibration resistance40 G × 11 ms · 10 G (10–2000 Hz)
Operating temperature-10 … +70 °C
ReferenceConfiguration
I/38CR-500-5-BZ-N-CVCI38CR5005BZNCVC500 pulses/revolution · 5 V ±5 % · bidirectional + zero · Line driver (5 V only) · 1 m cable · IP65 · axial output
I/38CR-500-1224-BZ-H-CVCI38CR5001224BZHCVC500 pulses/revolution · 12–24 V · bidirectional + zero · Push-pull · 1 m cable · IP65 · axial output
I/38CR-500-5-BZ-H-CVCI38CR5005BZHCVC500 pulses/revolution · 5 V ±5 % · bidirectional + zero · Push-pull · 1 m cable · IP65 · axial output
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
Incremental encoder for racks ELCIS I/38CR
Dimensional drawing of the incremental encoder for racks ELCIS I/38CR

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
16-tooth pinion, Ø38 mm housing | Linear resolution 0.005 to 1 mm | 50 to 2500 pulses/revolution | Push-pull or line driver | Power supply 5 V ±5 % or 12–24 V | IP54 shaft side | With integrated pinion preload
Dimetix_AG-1
Visor-Type Environmental Protector for Outdoor Installations Range: Mitigation of solar glare and focal protection against gusty rain or snow
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange 92 mm | Ø90 mm, shaft Ø10 h7 | 1–90000 imp/revolution | NPN, PNP, push-pull, driver, 1 Vpp | 5–30 V | IP65 shaft (IP66 sealed) | 100 kHz (1 MHz optional)
LVDT Manufacturer Logo Schreiber Messtechnik
LVDT Displacement Sensor | Outputs 4-20mA, 0-10V, 0-5V | IP67 Waterproof | Diameter 10mm | German Grade Accuracy | Special for Crack Monitoring
NESA Environmental Meters
Pt100 4 wires | -40 ÷ +60°C | Pt100 1/3DIN | ±0.1°C @ 0°C | IP67 and IP68 | 10÷30Vdc | <50g
Keller logo
Differential pressure transducer for liquids
NESA Environmental Meters
860-920MHz radio or GSM/GPRS/4G | Rain, temperature, humidity, and moisture detection | 8-10km range | 3W solar panel + 2000mA battery | -40 to +60°C | IP65 | ~455 x 300 mm
NESA Environmental Meters
Doppler Radar 24GHz | RS485 Modbus | Intensity 0.01-200 mm/h | -40°C ÷ +60°C | 10÷28Vdc | 0.7kg
ATESTEO LOGO, manufacturer of torque sensors
Inductive (Dual-Frequency) | 1,000 – 3,000 N·m | 16,000 RPM | PCD Flange 130.0 mm
Shopping Basket