A/MM63 Multi-turn Absolute Encoder

Budget-friendly price Request a quote
Square flange 63 mm, shaft Ø9.52 h7 | Up to 2²⁴ steps in 4096 turns | Gray or binary | Parallel NPN 70 mA or SSI RS422 | Power supply 5 ±5 %, 8–24 or 18–28 V | IP64 shaft (IP65 sealed) | Max. radial/axial load 8 kg

The ELCIS MM63 (A/MM63) is a 63 mm square flange optical multi-turn absolute encoder, up to 224 Steps in 4096 turns in Gray or binary code, with parallel NPN or SSI RS422 output. For severe environmental conditions, with square flange mounting, stainless steel shaft Ø9.52 h7 that supports 8 kg of radial/axial load, resistance to 50 G of impact and 12 G of vibration, operation between 0 and +70 °C and IP65 protection with SM6 connector.

As an optical multi-turn absolute encoder, with LED source and phototransistors, the A/MM63 encodes the position in Gray or Binary, up to 224 Steps in 4096 turns. The reading is output via parallel interface, with Latch option, or via SSI serial interface (RS422) in Gray code.

It is fixed by means of a square flange, with a stainless steel shaft Ø9.52 h7 that supports 8 kg of radial/axial load, and works between 0 and +70 °C with IP64 protection on the shaft side (IP65 in sealed version).

  • Resolution of up to 224 steps in 4096 laps (Gray/Binary).
  • Three power ranges: 5 V ±5 %, 8–24 V and 18–28 V.
  • NPN open collector or emitter output stages 70 mA with PTC.
  • Shock resistance of 50 G (11 ms) already vibrations of 12 G (10–2000 Hz).

Technical Frequently Asked Questions

What resolutions does the A/MM63 offer?

In Gray and Binary, 16, 32, 64, 128, 256, 512, 1024, 2048 or 4096 steps per revolution and 16, 256 or 4096 revolutions, up to 224 steps. Other solutions available upon request.

Can the SSI interface be used with binary code?

No. The manufacturer states that the SSI serial output is only available with Gray code (or Excess). For binary, the parallel interface is used, where the Latch input is standard.

What connectors does it support and with what level of protection?

CM6 and SM6 32-pin (IP65/IP66), CL and SL 10-pin (IP65/IP66) and CH 12-pin (IP67), with radial (R) or axial output depending on the connector.

Properties

FeatureSpecification
Mechanics
Weight580 g
AxisØ9.52 h7 Stainless steel (available sizes: Ø8, Ø10, Ø12, Ø12.7, upon request) (customizable upon request)
max radial/axial load.8 kg
Electric
Exit-side protectionIP65 to IP67 according to connector
Feeding5 V ±5 % · 8–24 V · 18–28 V
Max. consumption.200–400 mA according to number of bits (customizable upon request)
Direction of rotationSwitchable (up/down)
Exit codesGray (G), Binary (B)
Max resolution.2²⁴ in 4096 laps
Number of turns16, 256, 4096
Maximum frequency50 kHz
Protection and environment
axle-side protectionIP64 standard • IP65 sealed • IP53 low torque
max. continuous RPM4000 standard · 2000 sealed · 5000 low torque (intermittent: +30 %)
Impact/vibration resistance50 G (11 ms) 12 G (10–2000 Hz)
Operating/storage temperature0 … +70 °C / -30 … +85 °C
ReferenceConfiguration
A/MM63-1-B-256-1828-KP-L-CM6AMM631B2561828KPLCM6Turns: 16 · (2) · Binary code · 256 steps/turn · 18–28 V · NPN open emitter + PTC · Latch · 32 pins PT02A18-32P · IP65 · Axial output
ELCIS A/MM63 Multi-Turn Absolute Encoder
Dimensional drawing of the ELCIS A/MM63 multi-turn absolute encoder

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through-hole shaft Ø50 H7 | Ø170 mm, tangential coupling | 18000–900000 impedances/revolution | Driver 26LS31 or 1 Vpp | 5 V ±5 % | IP64 shaft (IP65 wired output) | ±2.5″; 2200 kHz with interpolation
DPF Sensors logo
Conductive plastic linear potentiometer.
DPF Sensors logo
Differential pressure transducer for air
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Self-cleaning turbidimeter, Measuring range 0-4,000/40,00/400,0/4,000 NTU
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
ORP probe by immersion in PVC tube. Length 720 mm. With SZ265 probe
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square □45, Ø4 h7 shaft | Up to 256 steps (8 bits) | Parallel NPN open collector | 5 V ±5 % | IP64 shaft (IP65 sealed) | Gray, Excess or custom
DPF Sensors logo
Analog-digital temperature and humidity controller sensor with LED signaling, relay alarm, for indoor use.
Dimetix_AG-1
Spare Part Kit for Dimetix D Series Laser Sensors | Cable glands and M16x1.5 nuts | Terminal blocks | Maintains IP65 protection rating | Made in Switzerland
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Internal elastic coupling | Hollow shaft H7 Ø6, 8, 9.52 or 10 mm | Housing Ø59 mm | 1 to 2540 imp/rev | NPN, push-pull, line driver, TTL | Power supply 5–30 V | IP53 on the shaft side
Shopping Basket