FAT Airflow and Temperature Sensor

Budget-friendly price Request a quote
4-20mA | 0-5 m/s · -20-80 °C | Omnidirectional hot wire | 120 x 80 mm control unit | 12Vdc | IP65

The NESA FAT is an indoor airflow and temperature sensor with an omnidirectional hot-wire probe. It measures air velocity from 0 to 5 m/s (0.01 m/s resolution) and temperature from -20 to 80 °C.

The sensor, located at the top of the probe, is protected by a cage and heated to a specific temperature; the airflow cools it measurably according to its speed. Output: 4÷20mA (FAT-B) and RS485 / Modbus with MCS module.

Key points

  • Air speed 0 ÷ 5 m/s: ±0.02 m/s
  • Temperature -20 ÷ 80 °C: ±0.3 °C (0…70 °C), ±0.4 °C outside that range
  • Omnidirectional hot-wire probe
  • 4÷20mA output; RS485 / Modbus with MCS module
  • 12Vdc power supply, IP65 and 300g

Technical Frequently Asked Questions

What are the FAT's outputs?

The FAT-B model has dual 4÷20mA outputs (air speed and temperature). With the MCS module, it provides RS485/Modbus output.

What does FAT-B include?

5m cable, protective ball and ring for the sensing element, and calibration report. The stand is not included.

How do I order it?

Sensor (FAT), output (B: 4÷20mA), sensor-datalogger cable (05, 10 or xx, length in meters to be specified) and support (SSW, wall mount, L = 7 cm).

Properties

FeatureSpecification
Measurement and operating principle
Measured magnitudeAirflow speed and temperature
Measurement range (airflow)0 ÷ 5 m/s
Measurement range (temperature)-20 to 80 °C
Resolution0.01 m/s
Accuracy (speed)±0.02 m/s
Accuracy (temperature)±0.3°C (0…70°C); ±0.4°C
Compensation temperature range0 ÷ 80 °C
Transducer typeOmnidirectional hot-wire probe
Regulatory complianceEC
Output signals and interface
Output (version B)4÷20mA (speed and temperature)
With MCS module (optional)RS485 / Modbus (C), with optional dual MCS module
Load resistanceMax. 500 Ω for current outputs
CalibrationIt comes with a calibration report
Power supply, environment, and mechanical data
Feeding12Vdc
ConsumptionTyp. < 0.5 W
ProtectionsAgainst polarity reversal
Degree of protectionIP65
Weight300 g
Supply (FAT-B)5m cable, ball head for the sensitive element and ring; stand not included
ReferenceConfiguration
FAT-BFATBModel: FAT · Output signal: Dual 4÷20mA output · Supplied with: 5m cable, protective ball for the sensitive element and ring; calibration report; stand not included
NESA FAT Hot Wire Airflow and Temperature Sensor
Dimensions of the NESA FAT airflow and temperature sensor

Other products

B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Combined glass/gel pH reference electrode, epoxy body. 9m cable
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Thread Ø 0.9 mm, 8 m/s | Stroke up to 3000 mm | Incremental, resolution 0.1 or 1 mm | NPN, PNP, push-pull, 1 Vpp | 4–20 mA, 0–10 V or pot. 1kΩ | Power 5, 12, 24 V ±5 % or 8–30 V | IP64 encoder (IP53 mechanical)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø90 mm, double O-ring | Shaft Ø12 h7 stainless steel | 1 to 25000 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP66 shaft (IP67 sealed) | 100 kHz (300 kHz optional)
DPF Sensors logo
Soil moisture sensor
ATESTEO LOGO, manufacturer of torque sensors
Inductive (Dual-Frequency) | 500 N·m – 4,000 N·m | Up to 40,000 RPM | PCD Flange 105.0 mm
NESA Environmental Meters
O3 and VOC | 0÷0.15 / 0÷0.5 / 0÷10 ppm (O3) | 0÷25 / 0÷500 ppm (VOC) | LCD 3.5 figures | 0÷5V DC or RS485 / ModBus | 12V DC, 800mA | 130x94x57mm
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Output 0 … 10 V or 4 … 20 mA | Profile 18 x 18 mm | Stroke 25 … 100 mm | Linearity ±0.075 … ±0.2 % | Repeatability ±0.002 mm | 16 … 30 V | IP40
ATESTEO LOGO, manufacturer of torque sensors
Dual Inductive Metrology | Limit 5,000 N·m | 15,000 RPM | PCD Flange 155.5 mm | Accuracy 0.05% | Inertia 0.0165 kg·m²
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
DeviceNet (D2), programmable speed | Housing Ø58 mm, servo mounting | Shaft Ø10 h8 (Ø6 optional) | 16 bit; 30 bit at 16384 revolutions | 10–30 V DC | IP64 shaft (IP66 sealed)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft H7 up to Ø15 | Ø59, tangential anti-rotation pin | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP66 sealed)
Shopping Basket