A/958HD Absolute Fieldbus Encoder
- Manufacturer: ELCIS Encoder
- Category: Encoder, Absolute Encoder, Absolute Encoder Fieldbus, SENSORS
In industrial environments that require a compact absolute encoder with a DeviceNet interface, the A/958HD is servo-mounted using front clips or screws and offers high resolution with a very good price/performance ratio.
The A/958HD is a single-turn or multi-turn absolute encoder with a DeviceNet (D2) interface and an ISO 11898 CAN transceiver, featuring programmable baud rates. It allows selection of 4096, 8192, 16384, 32768, or 65536 steps per revolution and 1, 4096, or 16384 revolutions, with a maximum of 30 bits of binary code. It includes two status LEDs and uses SMD technology.
Constructed with a Ø58 mm aluminum housing and a Ø10 h8 stainless steel shaft (Ø6 optional), it supports axial and radial loads of 40 and 110 N. It features IP64 protection on the shaft side (IP66 in the sealed version), withstands 30 G impacts and 10 G vibrations, and operates from -40 to +85 °C. Available in guemisa.es.
- Interface DeviceNet (D2) with CAN transceiver ISO 11898.
- Resolution of up to 16 bit per turn and 30 bit in 16384 turns.
- Programmable transmission speed and 2 LED of state.
- Nutrition 10–30 V DC with maximum consumption of 2.5 W.
Technical Frequently Asked Questions
What resolutions and frame rates does the A/958HD allow you to configure?
It allows you to choose 4096, 8192, 16384, 32768 or 65536 steps per revolution and 1, 4096 or 16384 revolutions, with a maximum resolution of 30 bits at 16384 revolutions.
What parameters are programmable in the DeviceNet interface?
Direction of rotation (complementary), total resolution, resolution per revolution, preset value and transmission mode: polled mode, cyclic mode or cos mode.
What connections are available?
3 IP65 cable glands (3PG), 3 IP65 steel cable glands (3PG-VA), 2 IP65 Ø 9–13 mm cable glands (2M20) and IP65 5-pin round connector (1BW).
Properties
| Feature | Specification |
|---|---|
| Housing | Aluminum (others available upon request) |
| Weight | 550 g single turn · 600 g multiturn |
| Axis | Ø10 h8 stainless steel (optional Ø6) |
| max. axial/radial load. | 40 / 110 N |
| Exit-side protection | IP65 depending on the connection |
| axle-side protection | IP64 standard · IP66 sealed |
| max. continuous RPM | 6000 standard · 3000 sealed (intermittent: +30 %) |
| Impact/vibration resistance | 30G (11ms) 10G (10–1000Hz) |
| Power supply / max. consumption. | 10–30 V DC · 2.5 W |
| Max frequency. | 800 kHz |
| Operating/storage temperature | -40 … +85 °C / -40 … +85 °C |
| Exit code | Binary |
| Division accuracy | ±½ LSB (<13 bit) · ±2 LSB (13–16 bit) |
| Max resolution. | 16 bits/turn · 30 bits in 16384 turns |
| Interface | DeviceNet (D2) · ISO 11898 CAN transceiver · programmable transmission speed |
Other products
