Standard Incremental Encoder I/50

Budget-friendly price Request a quote
Metal housing Ø50 mm | Stainless steel shaft Ø8 mm | 10 to 2500 pulses/revolution | NPN, push-pull or line driver | 5 V ±5 % or 12–24 V | IP52 shaft, IP65 output | Max. frequency 180 kHz

The ELCIS 50 (I/50) is a 50 mm diameter metal incremental encoder with an 8 mm diameter shaft, offering 10 to 2500 pulses per revolution for general use. It features an aluminum base, a steel cover, and weighs 275 g. It supports a 2.5 kg radial/axial load on its stainless steel shaft, operates from -10 to +70 °C, and has IP52 protection on the shaft side and IP65 protection on the output side. It uses a 2 m cable with a connector at the end of the cable. The electronics are NPN, open collector NPN, push-pull, or line driver, and it is powered by 5 V ±5% or 12 to 24 V, with a maximum frequency of 180 kHz and a standard current consumption of 60 mA or 50 mA with the line driver.

Housed in a Ø50 mm metal casing, the I/50 offers 10 to 2500 pulses per revolution, a maximum frequency of 180 kHz and NPN, NPN open collector, push-pull or line driver electronics, powered between 5 and 24 V.

Aluminum base, steel cover and Ø8 stainless steel shaft that supports 2.5 kg of radial/axial load. It works from -10 to +70 °C with IP52 protection on the shaft side and connects by a 2-pin cable with a connector at the end of the cable, both with IP65.

  • Resolution of 10 to 2500 pulses per lap and frequency up to 180 kHz.
  • Nutrition 5 to 24 V.
  • NPN output electronics, NPN open collector, push-pull and line driver.
  • Until 5000 rpm continuous.

Technical Frequently Asked Questions

What signal version does the I/50 offer?

Bidirectional + zero (BZ).

What supply voltages does it support?

5 V ±5 % and 12–24 V.

How do you connect the I/50?

Via 2 mm² cable or cable end connector (7, 10, 9, 12 or 5 contacts), both with IP65 protection.

Properties

FeatureSpecification
Mechanics
HousingMetal Ø50 mm
Weight275 g
AxisØ8 stainless steel
max radial/axial load.2,5 kg
Electric
Exit-side protectionIP65 (cable and connector at the end of the cable)
Feeding5–24 V (see technical specifications)
Max. consumption.60 mA standard · 50 mA line driver
Impulses per lap10 to 2500
Max frequency.180 kHz
Protection and environment
axle-side protectionIP52 (without sealed or low-torque option)
max. continuous RPM5000 (intermittent: +30 %; no sealed or low-torque option)
Impact resistance50 G × 11 ms
Vibration resistance12 G (10–2000 Hz)
Operating temperature-10 … +70 °C
Storage Temp.-30 … +85 °C
ReferenceConfiguration
I/50-100-5-BZ-N-CVK-02I501005BZNCVK02100 pulses/revolution · 5 V ±5 % · bidirectional + zero · Line driver · Cable · IP65 · axial output
I/50-1000-1224-BZ-H-CVK-02I5010001224BZHCVK021000 pulses/revolution · 12–24 V · bidirectional + zero · Push-pull · Cable · IP65 · axial output
I/50-1024-5-BZ-H-CVK-02I5010245BZHCVK021024 pulses/revolution · 5 V ±5 % · bidirectional + zero · Push-pull · Cable · IP65 · axial output
I/50-2000-1224-BZ-H-CVK-02I5020001224BZHCVK022000 pulses/revolution · 12–24 V · bidirectional + zero · Push-pull · Cable · IP65 · axial output
I/50-360-1224-BZ-H-CVK-02I503601224BZHCVK02360 pulses/revolution · 12–24 V · bidirectional + zero · Push-pull · Cable · IP65 · axial output
Standard incremental encoder ELCIS I/50
Dimensional drawing of the standard incremental encoder ELCIS I/50

Related documentation, cases, and guides

Other products

Monitran-Logo
100 mV/g ±10% nominal at 80 Hz | 2 Hz to 10 kHz ±5% | ±80 g | Constant current 0.5 to 8 mA | Stainless steel, IP67 / IP68 | With or without temperature output 10 mV/°C
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
SPI, TTL level | Ø 28 mm | 14-bit resolution | Ø 6 mm spindle or push-in coupling | 5 VDC (4.5 … 5.5 VDC) | IP54 / IP65 / IP67
Monitran-Logo
Para sensores de las series 2200 y 2285 | Conector Lumberg de 4 pines a extremos libres | Cable de ETFE apantallado de dos conductores con sobremalla | 5 m
DPF Sensors logo
Clinometer for use in civil works, geology
Digital pressure gauge
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Incremental A/B/Z | Ø 48 mm | 1024 ppr (4096 counts) | Spindleless: magnetic position marker | 5 VDC or 24 VDC | IP67 / IP68 / IP69 | Up to 29000 rpm
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Inductive, contactless | Output 0.1 … 10 V or 4 … 20 mA | Stroke 100 … 1000 mm | Linearity ≤ ±0.025 % FS (min. ±100 µm) | Resolution 10 / 20 µm | 18 … 32 VDC | IP67
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
SPI (TTL) | Ø 48 mm | Resolution up to 14 bits | Shaftless: magnetic position marker | 5 VDC (4.5 … 5.5 VDC) | IP67 / IP68 / IP69
Shopping Basket