Please clarify if the F4iS (Inductive) variant can withstand a nominal 60,000 Nm at 8,000 RPM, supported by its core with an inertia of 1.6378 kgm²?

Absolutely. This gauge has been designed on a robust mechanical architecture whose passive rotor weight generates immense inertia, measured at 1.6378 kg·m². When coupled with massive bolts to its 369.0 mm PCD flange (418 mm outer diameter rotor), it provides 75,300 kNm/rad of torsional rigidity. This structural assembly prevents fractures and allows it to operate traction test benches that apply a sustained 60,000 Nm while rotating at a dynamic threshold of 8,000 RPM.

What does Inductive Telemetry (Digital PCM) refer to in the F4iS interference (EMI) isolation?

This refers to the complete physical elimination of wiring or friction required to extract the signal from the shaft. The stator injects energy into the rotor, which digitally modulates the measured torque, returning a frame (PCM - 16-bit Pulse Code Modulation). This lack of cross-spectrum linkage galvanizes and creates a barrier against dV/dt inverter disturbances, achieving absolute metrological classes of 0.10 unaffected by external noise.

Torque Sensor F4iS 60000 Nm | 8,000 RPM | High Torsional Stiffness

Budget-friendly price Request a quote

Inductive PCM Transmission | 60,000 N·m | 8,000 RPM | PCD Flange 369.0 mm | Inertia 1.6378 kg·m²

Manufacturer: ATESTEO
Category: Very high torque (10,000-150,000 Nm), Rotary, Torque sensor

La serie F4iS mide par de hasta 60.000 N·m con telemetría inductiva digital PCM de 16 bits, sin contacto.

Velocidad máxima: 8.000 RPM. Brida PCD 369.0 mm (rotor exterior 418mm). Inercia del rotor: 1.6378 kgm². Rigidez torsional: 75.300 kNm/rad. Resistencia a rotura: > 500% del nominal.

Precisión: ≤ ±0.10%. Frecuencia portadora: 60 kHz ± 20 kHz.

Aplicaciones: testbeds de e-axle navales, verificación de motores y cadenas cinemáticas de maquinaria pesada.

Torque sensors.

Properties

Maximum Nominal Range (Nm)	60,000 N·m (Heavy Duty Titanic)
Rotational Limit (RPM)	Up to 8,000 RPM (PCM Dynamic Testing)
PCD Concentricity Diameter	Mechanical Flange 369.0 mm (Outer Rotor 418 mm)
Rotor Inertia (kgm²)	1.6378 (Extra-Heavy Rotational Mass)
Global Metrological Accuracy	≤ ±0.10% (No Inverter Noise Degradation)
Coupled Signal Technology	Digital Inductive Transmission PCM (Isolation)
Scalar Torsional Stiffness	75,300 kNm/rad (Extreme Cyclic Matrix)
Shock (Destructive) Resilience	> 500% Operating Tensile Strength Limit
Interference Protection	Absolute EMI Immunity to Motor Inductors
Nominal PLC Base Frequency	60 kHz Carrier ± 20 kHz