TC Contact Temperature Sensor

Budget-friendly price Request a quote
4-wire Pt100 | -40 ÷ +60 °C | Pt100 1/3DIN (±0.1 °C @ 0 °C) | 30 x 10 x 5 mm | Operation -60 ÷ +100 °C | IP66

The NESA TC is a 1/3DIN (100 Ω @ 0 °C) 4-wire contact surface temperature sensor with a Pt100 platinum resistance thermometer, made of aluminum with a flat, adhesive surface (30 x 10 x 5 mm) and IP66 protection. Compliant with the WMO standard.

It is designed for applications such as measuring the surface area of photovoltaic panels or general measurements. Typical range is -40 to +60 °C, operating conditions are -60 to +100 °C, sensitivity is 0.01 °C, and response time is less than 10 s.

Key points

  • Platinum Pt100 1/3DIN resistance thermometer (100 Ω @ 0 °C) according to DIN 43760 (±0.1 °C @ 0 °C)
  • Made of aluminum with a flat, adhesive surface (30 x 10 x 5 mm) and weighing less than 10 g
  • Sensitivity of 0.01 °C and response time of less than 10 s
  • Natural output Pt100 4-wire with 10 cable, calibration report (reference TC-N)
  • IP66 protection rating and operating conditions of -60 ÷ +100 °C

Technical Frequently Asked Questions

What output signal does the TC contact sensor deliver?

It is supplied in TC-N version with natural Pt100 1/3DIN 4-wire output (2 red wires to Pin 1 Pt100 and 2 white wires to Pin 2 Pt100), with a 10m calibration report cable.

How do I order the TC contact temperature sensor?

The order code combines the sensor (TC), the output (N = 4-wire natural Pt100), and the sensor-datalogger cable (05 = 5m CS05, 10 = 10m CS10, xx = CSxx, length in meters to be specified). The available reference is TC-N.

What are the dimensions and service range of the TC sensor?

It has dimensions of 30 x 10 x 5 mm, a weight of less than 10 g, IP66 protection, a typical measuring range of -40 ÷ +60 °C and an operating temperature of -60 ÷ +100 °C.

Properties

FeatureSpecification
Measurement and sensitive element
Measured magnitudeSurface temperature by contact
Typical measurement range-40 to +60 °C
Transducer typePlatinum Pt100 resistance thermometer 1/3DIN (100 Ω @ 0 °C)
PrecisionDIN 43760 1/3 DIN (±0.1°C @ 0°C)
Sensitivity0.01 °C
Response time< 10 s
Regulatory complianceWMO Standard; CE
Output signals and connections
Output signal (N version)Natural Pt100 4-wire with 10m cable (TC-N)
With MCS module (optional)0÷2Vdc (A), 4÷20mA (B) or RS485 / Modbus (C)
Thread allocationRed threads: Pin 1 Pt100 · White threads: Pin 2 Pt100
Power supply, environment, and mechanical data
Feeding10÷30Vdc
Typical consumption< 0.01 W
Electrical protectionsProtection against polarity reversal and lightning strikes
Operating conditions-60 to +100 °C
Degree of protectionIP66
Construction materialAluminum with a flat, adhesive surface
Dimensions30 x 10 x 5 mm
Weight< 10 g
ReferenceConfiguration
TC-NTCNModel: TC · Construction: Aluminum with adhesive flat base (30 x 10 x 5 mm), IP66 · Output signal and cable: Natural Pt100 1/3DIN 4-wire, with 10 m cable, calibration report
NESA TC Contact Temperature Sensor
NESA TC Contact Temperature Sensor Dimensional Drawing

Other products

NESA Environmental Meters
Pt100, 0÷2Vdc, 4÷20mA, RS485 | -40 ÷ +60 °C | Pt100 1/3DIN (±0.1°C @ 0°C) | Ø 162 x 220 mm | 10÷30Vdc | Natural or forced ventilation
Digital pressure gauge
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Protective cover | Flange Ø115 mm, centered Ø85 h7 | Shaft Ø11 h7 stainless steel | 1 to 3600 rpm | NPN, push-pull, driver or discriminator | Power supply 5–30 V | IP65 shaft (IP66 with Z seal)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Stroke 25 … 300 mm | Linearity ≤ ±0.05 … ±0.2 % | Repeatability ≤ ±0.01 mm | Ø 16 mm | IP67 | M8 cable or connector
Dimetix_AG-1
Spare Part Kit for Dimetix D Series Laser Sensors | Cable glands and M16x1.5 nuts | Terminal blocks | Maintains IP65 protection rating | Made in Switzerland
DPF Sensors logo
CO2, humidity and temperature sensor, for OUTDOORS, with ModBus RS485 communication
Monitran-Logo
LVDT industrial de CA y CC | Carrera de ±0,5 a ±550 mm | Acero inoxidable con blindaje magnético | IP65 (IP68 opcional) | Hasta +200 °C en CA (opción VH) | Salidas CC 0-5 V, 0-10 V, 4-20 mA o bipolar | Cable de 2 m
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Magnetostrictive | Stroke 50 … 4250 mm | Start/Stop pulses, RS422 | 1 to 3 position markers | Linearity ≤ ±50 … ±120 µm | 13 … 34 VDC | IP67 / IP68
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft H7 up to Ø15 | Ø59, tangential anti-rotation pin | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP66 sealed)
Shopping Basket