DPF-MOCO2TH
CO2, humidity and temperature sensor, for OUTDOORS, with ModBus RS485 communication
- Manufacturer: DPF Sensors
- Category: SENSORS, Gas Sensors, Humidity Sensors, Temperature sensors, Temperature sensors for air conditioning
CO2, humidity and temperature sensor, for OUTDOORS, with ModBus RS485 communication
Co2 range:….4000 ppm, temperature: -0…+50ºC, humidity: 0….100%
Power supply: 9…24 Vdc
Properties
Other products
Servo flange ('Servo Mount') Ø38 mm | Front centering Ø33 h7 | Resolution up to 8192 steps/revolution (13 bits) | SSI serial interface (RS422) | Natural binary code | Up to 12000 continuous rpm (option B) | Ø6.35 h7 stainless steel spindle | IP64 / IP66 sealed protection (Z) | Max. consumption 35 mA | Power supply 5 V, 5÷30 V or 10÷30 V
Visor-Type Environmental Protector for Outdoor Installations Range: Mitigation of solar glare and focal protection against gusty rain or snow
Three-phase network analyzer with indication, RS485 + 4/20mA, 3 x /5A input – 3 x 550VAC
RS232 – RS485 – RS232 Isolator-Repeater Converter
B10 mounting flange | Resolution up to 30 bits at 16384 revolutions | SSI serial interface or SSI with Preset | Gray or Binary codes | 10–30 VDC power supply | Ø11 h7 stainless steel spindle | Max. radial/axial load 180 N | Shock resistance 30 G (11 ms) | Bearing life > 10⁵ at 1000 rpm | Weight 1800 g
Redundant Angle LVDT | Independent Dual Channel 2 x 60° | IP68 Hermetic Protection | Stainless Steel Housing 7kg | 80.0 mm PCD Flange | 4-20mA / ±10V Outputs | EMI Immunity
Hollow through shaft H7: Ø6, Ø8, Ø10, Ø12 or Ø15 mm | Resolution up to 8192 steps/revolution (13 bit) | Gray code | Parallel output via 1 m cable (IP65) | Power supply 5 V, 15 V, 8–24 V, 18–28 V or 10–30 V | Max. radial/axial load 4 kg | Shaft-side protection IP64 (IP65 sealed) | Max. continuous speed 6000 rpm (8000 rpm under torque) | Switchable rotation direction (up/down) | Operating temperature 0…+70 °C
Top Input | Sensitivity 100mV/g | Frequency 2Hz-10kHz | Dynamic Range ±80g | IEPE Power Supply | Temperature -55 to 140°C | IP67 Protection | Stainless Steel | Insulated Base | 2-pin Connector Mil-C-5015
Dimetix DBN-50-050 industrial laser sensor for distance and position measurement up to ~50 m on natural surfaces, with typical accuracy ±5.0 mm @2σ (±2.5 mm @1σ), frequency up to 10 Hz and analog output 0/4-20 mA.