Single-turn Absolute Encoder A/958H

Budget-friendly price Request a quote
Servo mounting Ø58, shaft Ø10 h8 | Up to 65536 steps (16 bits) | Parallel, push-pull 20 mA | 10–30 V | IP64 shaft (IP66 sealed) | Gray or binary | Optional preset (P1)

The ELCIS 958H (A/958H) is a Ø58 mm single-turn absolute encoder for industrial use, with servo-type fixing by means of front clips or screws.

The A/958H is a single-turn absolute encoder with optical readout via LED and IR photodiode array. It allows selection of 360, 4096, 8192, or 65536 steps per revolution, with a maximum resolution of 16 bits. It outputs the position in Gray or Binary code via a parallel (PP) or preset parallel (P1) interface, with a 20 mA push-pull output stage and a 200 kHz LSB step rate.

Built with a Ø58 mm aluminum housing and a Ø10 h8 stainless steel shaft (Ø6 optional), it supports radial and axial loads of 40 and 110 N. It has IP64 protection on the shaft side (IP66 in the sealed version), withstands impacts of 30 G and vibrations of 10 G, and operates in a thermal range of -30 to +70 °C.

  • Maximum resolution of 16 bit per lap.
  • Exit codes Gray and Binary; division accuracy up to ±½ LSB (<13 bit).
  • Parallel output interface (PP) or parallel with preset function (P1).
  • Push-pull output stage of 20 mA fed to 10–30 V DC with 200 kHz LSB.

Technical Frequently Asked Questions

What steps per revolution does the A/958H allow you to configure?

It allows you to choose 360, 4096, 8192 or 65536 steps per revolution, with a maximum resolution of 16 bits.

What is the difference between PP and P1 interfaces?

The PP interface displays the angular value on the output connector in parallel; the number of conductors is proportional to the resolution and the code type. The P1 interface is the same as the PP interface, but with a preset function.

What mechanical and sealing options are available?

The standard version offers IP64 protection on the shaft with bearings for 6000 rpm continuous operation. The W option incorporates sealed bearings with IP66 protection at 3000 rpm, and the Q option features a fully stainless steel encoder.

Properties

FeatureSpecification
Mechanics
Casing / WeightAluminum · 200 g (customizable upon request)
Axis / radial-axial load max.Ø10 h8 stainless steel (optional Ø6) · 40 / 110 N
Starting torque50 gcm standard · 90 gcm sealed
bearing life>10⁵ h at 1000 rpm
Electric
Power supply / max. consumption.10–30 V DC · 100–400 mA depending on bits
Light source / sensorsLED (useful life ≥ 100,000 h) · IR ASIC photodiode array
LSB pitch frequency200 kHz
Max. resolution / codes16 bit / 1 turn · Gray, Binary · division precision ±1/2 LSB (<13 bit), ±2 LSB (13–16 bit)
Interface / OutputParallel (PP) · Parallel with preset (P1) · Push-pull 20 mA
Protection and environment
IP protectionIP64 on the axis (IP66 sealed) · IP65 at the outlet depending on the connection
max. continuous RPM6000 standard · 3000 sealed (intermittent: +30 %)
Impact/vibration resistance30 G (11 ms) 10 G (10–1000 Hz)
Operating/storage temperature-30 … +70 °C / -40 … +85 °C
Humidity98 % (without liquid state)
Other features
ConnectionCable 1 m connector, axial or radial
ReferenceConfiguration
A/958H-12-00-10-B-P1-0-CVA958H120010BP10CV4096 steps/rev. · 1 (single revolution) · Standard Ø10 mm shaft · Binary · Interface: P1 · 1 m axial cable (up to 25 bits in series) · IP65
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
ELCIS A/958H Single-Turn Absolute Encoder
Dimensional drawing of the ELCIS A/958H single-turn absolute encoder

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
B10 flange Ø115 mm, shaft Ø11 h7 | 1–10000 and 1–2540 imp/revolution | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP65 shaft (IP66 sealed) | Two galvanically isolated outputs | Radial/axial load 15 kg
DPF Sensors logo
Analog-digital temperature and humidity controller sensor with LED signaling, relay alarm, for indoor use.
DPF Sensors logo
The BPSE load cell, used to measure compressive forces in industrial applications, especially test benches. Measuring ranges from 500 kg to 350 tons.
Digital pressure gauge
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Metal housing Ø70 mm | Standard B10 flange Ø115 | Stainless steel shaft Ø11 h7 | 1 to 25000 rpm | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP66 shaft (IP67 sealed)
Disibeint Electronic, manufacturer of level sensors and control relays
CONDUCTIVE ELECTRODES WITH BUILT-IN AMPLIFIER
Monitran-Logo
Indicador autónomo de velocidad rms | Pantalla LCD de 2 dígitos | Rango mostrado 0-99 mm/s rms | Ancho de banda 6 Hz – 1 kHz | Batería de litio-manganeso, 5 años | IP65 | -20 a +85 °C
DPF Sensors logo
Tension/compression load cell
ATESTEO LOGO, manufacturer of torque sensors
Digital Inductive Coupling | 2,500 – 20,000 N·m | 17,000 RPM | PCD Flange 196.0 mm | Inertia 0.0788 kg·m²
LVDT Manufacturer Logo Schreiber Messtechnik
Redundant Angle LVDT | Independent Dual Channel 2 x 60° | IP68 Hermetic Protection | Stainless Steel Housing 7kg | 80.0 mm PCD Flange | 4-20mA / ±10V Outputs | EMI Immunity
Shopping Basket