PIR Pyrheliometer

Budget-friendly price Request a quote
µV, 0–1Vdc or 4–20mA | 0–2000 W/m² | 5° field of view | ISO 9060 Class I | Ø 38 mm · 32.5 cm | 1.5 kg

El NESA PIR es un pirheliómetro de primera clase según ISO 9060 para la medida de la radiación solar directa (0 ÷ 2000 W/m²) mediante termopila, con campo de visión de 5° conforme a la normativa WMO y rango espectral de 250 a 4000 nm.

Los diafragmas solo dejan llegar la luz directa. Salida natural en µV (10 µV/(W/m²)), 0÷1Vdc o 4÷20mA.

Key points

  • Primera clase según ISO 9060; campo de visión 5° (WMO)
  • 0 ÷ 2000 W/m², 250 ÷ 4000 nm
  • Sensibilidad 10 µV/(W/m²), precisión media ±0,5 %, respuesta < 9 s
  • Salida natural en µV, 0÷1Vdc (configurable a 0÷2Vdc) o 4÷20mA
  • Aleación de aluminio, Ø 38 mm, 1,5 kg

Technical Frequently Asked Questions

¿Qué mide el pirheliómetro PIR?

La radiación solar directa (W/m²), con un campo de visión de 5° y un rango espectral de 250 a 4000 nm.

What exits does it have?

PIR-N: natural de la termopila, 10 µV/(W/m²). PIR-A: 0÷1Vdc (configurable a 0÷2Vdc). PIR-B: 4÷20mA. Las versiones A y B se alimentan a 10÷28 Vdc.

How do I order it?

Sensor (PIR), salida (A, B o N) y cable sensor-datalogger (05, 10 o xx, longitud en metros a especificar). Ejemplo del fabricante: PIR N 10.

Properties

FeatureSpecification
Measurement and operating principle
Measured magnitudeRadiación solar directa (W/m²)
Operating range0 ÷ 2000 W/m²; 250 ÷ 4000 nm
Field of view5°, según la normativa WMO
Typical sensitivity10 µV/(W/m²)
Average accuracy±0.5%
Response time< 9 s
TransducerTermopila (sensor pasivo)
ClassificationPrimera clase según ISO 9060
Regulatory complianceWMO; ISO 9060; CE
Output signals and interface
Output (version N)10 µV/(W/m²), direct from thermopile
Output (version A)0÷1Vdc (configurable a 0÷2Vdc)
Output (version B)4÷20mA
Output impedance500 Ω / 1000 Ω
CalibrationPor comparación con instrumento certificado como patrón primario de la WMO; se entrega con certificado de calibración
Power supply, environment, and mechanical data
Alimentación (versiones A y B)Vdc: 10÷28V (pin 5)
ProtectionsProtection against polarity reversal and lightning strikes
Operating conditions-40 to +80 °C
MaterialAluminum alloy
Total length32,5 cm
Body diameter38 mm
Weight1.5 kg
ReferenceConfiguration
PYREPYREModel: PIR · Output signal: 0÷1Vdc (configurable to 0÷2Vdc) · Supplied with: Calibration report
PIR-BPIRBModel: PIR · Output signal: 4÷20mA · Supplied with: Calibration report
PIR-NPIRNModel: PIR · Output signal: Natural in µV (10 µV/(W/m²)) · Supply: With calibration report
NESA's first-class PIR pyriometer
Dimensiones y conexiones del pireliómetro PIR de NESA

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through shaft Ø6, 8, 10, 12 or 15 mm | Housing Ø59 mm | 1 to 3600 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP64 shaft (IP65 Z-seal) | Anti-rotation pin Ø5 mm
DPF Sensors logo
CO2, humidity and temperature sensor, for OUTDOORS, with ModBus RS485 communication
Dimetix_AG-1
Spare Part Kit for Dimetix D Series Laser Sensors | Cable glands and M16x1.5 nuts | Terminal blocks | Maintains IP65 protection rating | Made in Switzerland
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow spindle H7 Ø6, 8, 10, 12 or 15 | Up to 65536 steps × 4096 revolutions | SSI with preset, Gray or binary | Optional Sin/Cos 1024 or RS422 16384 ppr | Power supply 10–30 V | IP64 spindle (IP66 sealed) | Anti-rotation pin
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø6–10 mm | Housing Ø72 mm | 1 to 25000 imp/revolution | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP64 shaft (IP66 sealed) | Star-shaped, compensates ±1 mm axial
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Ø 3…10 mm | Max. torque up to 1 Nm | Fork · Double articulation | IPX arms and plates
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Ø8 h7 | Housing Ø55 mm | 1 to 1000 imp/rev | NPN, PNP, push-pull or driver | Power supply 5–30 V | IP64 shaft (IP66 Z-sealed) | 40 kHz (75 kHz optional)
DPF Sensors logo
Incremental wire encoder for travels of 6, 8, 10 and 12 m, resolution of 0.1 to 1 mm/pulse and Push-Pull or Line Driver output.
Shopping Basket