Support arms for SS1, SS2 and SS3 sensors
Budget-friendly price Request a quote
Support arms | 50, 90 and 150 cm | Ø 25 mm | Post Ø max. 80 mm | Anodized aluminum | Pole or wall mounted
- Manufacturer: Nesa
- Category: NESA Accessories, Sensor accessories, SENSORS
NESA's SS1, SS2 and SS3 are support arms for sensors, for pole or wall mounting, with a diameter of 25 mm and available in lengths of 50 cm, 90 cm and 150 cm.
Each arm has a clamp for attaching the NESA sensors and a second clamp of variable diameter for attaching to poles with a maximum diameter of 80 mm. They are made of silver anodized anti-corrosion aluminum.
Key points
- Support arms for sensors, pole or wall mounted
- SS1 of 50 cm, SS2 of 150 cm and SS3 of 90 cm
- Clamp for securing NESA sensors
- Second clamp of variable diameter, for posts of max. Ø 80 mm
- Silver anodized anti-corrosion aluminum, Ø 25 mm
Technical Frequently Asked Questions
What are SS1, SS2, and SS3?
Support arms for NESA sensors, for pole or wall mounting, in lengths of 50 cm, 90 cm and 150 cm.
What diameters do they have?
The arms are Ø 25 mm and the second clamp, of variable diameter, accepts posts of max. Ø 80 mm.
What material are they made of?
Made of anti-corrosion anodized silver aluminum.
Properties
| Feature | Specification |
|---|---|
| Support arms | |
| Product type | Support arms for sensors |
| SS1 Length | 50 cm |
| SS2 Length | 150 cm |
| SS3 Length | 90 cm |
| Diameter | Ø 25 mm |
| Material | Silver anodized anti-corrosion aluminum |
| Subjection | |
| Sensor mounting | Clamp for securing the sensors |
| Second gag | Variable diameter |
| Post mounting | Max. diameter 80 mm |
| Support for | Pole or wall-mounted sensors |
Related documentation, cases, and guides
Other products
Through shaft Ø6, 8, 10, 12 or 15 mm | Housing Ø59 mm | 1 to 3600 impedances/revolution | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP64 shaft (IP65 Z-axis seal) | Elastic ±0.15 mm, stop collar
IO-Link | Ø 36 mm | 16 bits per revolution | Shaft Ø 6 mm, Ø 10 mm or hollow Ø 6 mm | 24 VDC (16 … 30 VDC) | IP67 / IP69K | Measuring range: 44 revolutions (15840°)
Anti-solar radiation protector
MAGNETIC LEVEL SWITCHES VARIABLE LENGTH
Potentiometric or analog | Thread Ø 0.51 mm | Stroke 200, 500 or 750 mm | Pot. 1 kΩ, 4–20 mA, 0–10 V, 0–5 V | Electronic power supply 5, 12 or 24 V ±5 % | Linearity ±0.25 % fs | IP54
Conductivity range from 4 to 2,000 mS/cm and TDS (total dissolved solids) from 10ppt to 1,000ppt 4…20mA and Modbus output
Cell content K=1cm-1 (2 to 2,000µS) Thread 1″ BSP, body material polypropylene
Industrial driver for MTN/EP probes | Voltage or 4-20 mA 2-wire output | -24V, +24V, or 24VDC | AC vibration 5 Hz – 1 kHz | -20 °C to 80 °C | Calibrated with SAE4140 steel | 450 g