Monitran MTN/P1100 High Output Load Accelerometer
- Manufacturer: Monitran
- Category: Accelerometers and Vibration Sensors, SENSORS, Without amplification
The Monitran MTN/P1100 is a high-sensitivity (1100 pC/g ±10% nominal at 80 Hz) top-input charge accelerometer with an integrated TNC connector, suitable for underground leak detection, seismic monitoring, and instrumentation. It requires the use of an external charge amplifier such as the MTN/CA003.
Constructed of stainless steel with IP65 sealing, a non-insulated base, and a wide temperature range of -55 to 250 °C, it is mounted via a ¼"-28 UNF female thread. Guemisa is an official distributor of Monitran in Spain.
Key points
- High load sensitivity: 1100 pC/g ±10% nominal at 80 Hz and capacitance of 450 pF nominal (4400 pF max.)
- Wide temperature range of -55 to 250 °C and dynamic range of ±100 g
- Stainless steel housing, IP65, TNC connector and ¼"-28 UNF female mounting
Technical Frequently Asked Questions
Does the Monitran MTN/P1100 load accelerometer require external electronics?
Yes. As it is a load output accelerometer (1100 pC/g) without internal electronics, it requires an external load amplifier such as the Monitran MTN/CA003 to convert the signal.
What temperature range does the MTN/P1100 support?
Lacking internal electronics, it withstands working temperatures from -55 °C to 250 °C.
For what applications is the MTN/P1100 selected over other P-series accelerometers?
Due to its high load sensitivity (1100 pC/g nominal at 80 Hz), it is used in underground water leak detection, seismic monitoring and instrumentation.
Properties
| Feature | Specification |
|---|---|
| Measure and signal | |
| Measured magnitude | Acceleration (vibration) |
| Exit | Piezoelectric load (requires load amplifier, e.g. MTN/CA003) |
| Load sensitivity | 1100 pC/g ±10% nominal at 80 Hz |
| Capacitance | 450 pF nominal (4400 pF max) |
| Mounted base resonance | 10 kHz (nominal) |
| Dynamic range | ±100 g |
| Cross-sectional sensitivity | Less than 5% |
| Food and environment | |
| Required load amplifier | MTN/CA003 |
| Isolation | Non-insulated base |
| Temperature range | -55 to 250 °C |
| Sealed | IP65 |
| Mechanics and connection | |
| Housing material | Stainless steel |
| Entrance | Superior |
| Connector | Integrated TNC |
| Mounting | ¼"-28 UNF female thread |
| Tightening torque | 8 Nm |
| Dimensions | 42 mm high, Ø32 mm, 32 mm hexagon between faces |
| Weight | 250 g (nominal) |
| Reference | Configuration |
|---|---|
| MTN/P1100 MTNP1100 | High output load accelerometer (1100 pC/g ±10%), TNC connector, ¼"-28 UNF female mount MTN/P1100 Technical Data Sheet (PDF) |


Related documentation, cases, and guides
Other products









