B&C SZ165 pH Sensor

Budget-friendly price Request a quote

B&C SZ165 pH sensor with 9m cable, combined glass/reference electrode for general pH measurement in industrial processes and instrumentation.

Manufacturer: B&C Electronics
Category: Water quality, SENSORS, pH and Redox Probes

The B&C SZ165 pH sensor it's a combined glass/reference pH electrode with glass body, ring joint and cable 9 m, designed for reliable pH measurement in general process applications and industrial instrumentation.

Thanks to its compact size, it can be easily integrated into measuring equipment, in-line installations, and submersible setups using compatible accessories. Its design is geared towards providing a stable response and easy integration into pH control and monitoring systems.

The model SZ165 It is a suitable option for applications where reliable pH measurement is required under general process conditions, including industrial facilities, measuring equipment, and online applications.

Applications of the SZ165 pH sensor

Industrial instrumentation for pH measurement
Online measurement systems
General process applications
Submersible mountings using compatible accessories

When should I use this pH sensor?

The SZ165 pH sensor is a suitable choice when a combined glass electrode, with a long cable and compact design, is needed for general pH measurement applications in process or industrial instrumentation.

Technical advice: At Guemisa we help you select the right pH sensor according to the type of liquid, the installation and the actual working conditions.

Properties

Reference	SZ165
Guy	Combined glass/reference pH electrode
Body	Glass
Union	Annular
Measuring range	0 to 13 pH
Working temperature	0 to 100 °C
Maximum pressure	Up to 10 bar
Length	110 mm
Diameter	12 mm
Connection	9m cable
Internal reference	Ag/AgCl
Membrane resistance at 25 °C	50 MΩ
Application	General use, industrial meters, in-line installation

Related documentation, cases, and guides

Technical documentation

Use cases

Use of electrical conductivity for measuring nutrients in slurries

All technical information about GUEMISA

Other products

SSI RFC-4800 Non-Contact Angle Sensor

SSI 13-bit (Gray) | Ø 48 mm | 12-bit resolution | Spindleless: magnetic position marker | 5 VDC or 24 VDC | IP67 / IP68 / IP69 | Up to 30,000 rpm

Displacement, Encoder, Absolute Encoder, Single-turn Absolute Encoder, Absolute Magnetic Encoder, Angular displacement sensor, SENSORS

Dimetix DAE-10-050 Laser Distance Sensor

For travel distances of a few meters and up to ~50 m, with typical accuracy of ±1 mm @2σ, 100 Hz and extended thermal range of -40 to +60 °C.

Displacement, SENSORS, Laser distance sensors, Level Sensors, Level sensors for solids

Incremental Encoder I/58EH

Shaft Ø10 g7 | Housing Ø58 mm, centered Ø36 f5 | 1 to 2500 imp/rev | Push-pull or line driver | Power supply 5–24 V | IP54 shaft side | Max. frequency 100 kHz

Encoder, Incremental Encoder, Low Cost Incremental Encoder, SENSORS

Potentiometric transducer with TX2 mounting clamps

Voltage divider | Stroke 25 … 300 mm | Linearity ±0.05 … ±0.2 % | Repeatability 0.01 mm | Ø 16 mm | IP67 | Cable or connector M8

Displacement, Linear Potentiometer, SENSORS, Potentiometric linear sensors, Linear Transducers

Single-turn Absolute Encoder A/958H

Servo mounting Ø58, shaft Ø10 h8 | Up to 65536 steps (16 bits) | Parallel, push-pull 20 mA | 10–30 V | IP64 shaft (IP66 sealed) | Gray or binary | Optional preset (P1)

Encoder, Absolute Encoder, Single-turn Absolute Encoder, SENSORS

TM1 magnetostrictive transducer with SAE J1939 threaded flange

Magnetostrictive, non-contact | CAN SAE J1939 | Stroke 50 … 2000 mm | Linearity ≤ ±0.04 % FS (min. 300 µm) | Resolution ≤ 0.1 mm | 12/24 VDC (8 … 34 VDC) | 350 bar · IP67

Displacement, SENSORS, Magnetostrictive Linear Transducer, Linear Transducers

Single-turn Absolute Encoder A/790

Flange Ø90, shaft Ø10 h7 | SSI with preset, RS422 | Up to 65536 steps (16 bits) | Gray or binary programmable | 10–30 V | IP65 shaft (IP66 sealed) | Optional Sin/Cos 1024 or RS422 16384 ppr

Encoder, Absolute Encoder, Single-turn Absolute Encoder, SENSORS

B&C SZ1021 pH Sensor

Combined glass/gel reference pH electrode, epoxy body. 1.5m cable with BNC.

Water quality, SENSORS, pH and Redox Probes

Torque Sensor SeS Z50 50/100 Nm | 25,000 RPM | Hybrid Dense Steel Rotor

Light Telemetry (eS Series) | Flexible Range 50 – 100 N·m | High Strength Steel | PCD Flange 101.5 mm | Inertia 0.00350 kg·m²

Low torque (0.5-100 Nm), Rotary, Torque sensor

Portable Electronic Steering Wheel VP53

Incremental output | 4 CNC pushbuttons, stop mushroom button | Resolution and axis switches | 100 impedances/revolution with latching | NPN, PNP, push-pull, driver | 5V or 8–28V power supply | IP64 axis (IP65 output)

Encoder, SENSORS, Electronic Steering Wheels