Special Incremental Encoder I/79
- Manufacturer: ELCIS Encoder
- Category: Encoder, Incremental Encoder, Special Series Incremental Encoder, SENSORS
The Special Incremental Encoder I/79 solves the critical need to measure continuous displacements in heavy industrial machinery, offering superior mechanical robustness for demanding environments of cutting and measuring sheet metal or fabric.
Its construction with bearings with a lifespan exceeding 1.5 billion revolutions guarantees stability under radial and axial loads of up to 2 kg, supporting vibrations of 12G and shocks of 50G without loss of precision in the system.
Designed to operate between -10 and 70 °C under industrial conditions, this Special Incremental Encoder I/79 combines durability with energy efficiency, available in guemisa.es.
- It supports axial loads of up to 2 kg.
- Bearing life greater than 1.5 x 10^9 turns.
- Vibration resistance of 12 G and impact resistance of 50 G.
- LED light source with over 100,000 hours of lifespan.
Technical Frequently Asked Questions
How does the I/79 differ from the base model of the series?
The I/79 stands out for its reinforced mechanical robustness, specifically designed to withstand axial loads of up to 2 kg and vibrations of 12G, characteristics that differentiate it from the standard models with lower load capacity.
What alignment precautions does the I/79 axle require?
The 79.8mm diameter shaft requires careful alignment to avoid excessive lateral loads. Clockwise rotation from the shaft side must be observed to ensure that the Push-Pull or NPN outputs operate with the correct polarity as specified in the datasheet.
What connectors and output options are available for the I/79?
It is available with a 2-meter CVK cable, or VMK (7-pin), TMK (7-pin sealed), and VLK (10-pin) connectors. Outputs include NPN Open Collector at 10mA or Push-Pull at 30mA for direct PLC integration.
Properties
| Feature | Specification |
|---|---|
| Sensor type | Incremental |
| Main application | Continuous measurement of sheet metal and fabric |
| Feeding | 5÷24V (±5%) |
| Axis | Ø79.8mm |
| Weight | 500 grams |
| Maximum axial load | 2 kg |
| maximum continuous RPM | 5000 rpm |
| Starting torque | 8 gcm |
| Bearing life | 1.5 x 10^9 turns |
| Impact resistance | 50 G x 11ms |
| Vibration resistance | 12 G (10 ÷ 2000 Hz) |
| Temperament operation | -10 to 70 °C |
| Storage Temperament | -30 to 85°C |
| Pulses/revolution | 1, 10 or 1000 PPR |
| Maximum frequency | 180 kHz |
| IP protection output | IP65 |
Other products
