Incremental Encoder for I/59ZM Motors
- Manufacturer: ELCIS Encoder
- Category: Encoder, Incremental Encoder, Incremental Encoder for Motors, SENSORS
The I/59ZM Incremental Motor Encoder addresses the need for precise feedback in industrial applications where direct coupling is critical. Its robust design allows for compensation of axial and radial displacements without compromising the integrity of the measurement system, ensuring operational stability under varying dynamic loads.
The technical solution integrates an incremental sensor with up to 50,000 pulses per revolution and a maximum output frequency of 100 kHz. The encoder supports starting torques exceeding 85 gcm and allows for electronic configurations such as NPN, PNP, or Push-Pull to suit the control requirements of the motorized system.
Constructed with an anodized aluminum base and Valox 420 cover, it withstands 12 G vibration and operating temperatures between 0 and 70 °C. IP65 protection at the outlet and sealed bearings ensure reliability in harsh environments. Available in guemisa.es.
- Anodized aluminum base for efficient heat dissipation.
- Valox 420 cover resistant to corrosion and wear.
- Axis passthrough with angular compensation up to ±1°.
- Impact resistance of 50 G x 11ms without structural damage.
Technical Frequently Asked Questions
How does the I/59ZM model differ from the standard I/E6 encoder?
The I/59ZM features a spring coupling and hollow shaft passthrough, while other models may require external adapters. The ZM series offers greater resistance to shock and vibration compared to base versions.
What alignment precautions are required for the I/59ZM shaft during assembly?
The encoder supports axial compensation of ±0.15 mm and radial compensation of ±0.05 mm, but precise centering is recommended to prevent premature wear of the sealed bearings. Ensuring the integrity of the shaft passthrough is vital.
What connectors and output options are available for the I/59ZM?
Terminals (VM, VK), connectors (CH, CH5), or direct wiring with custom lengths are available. Additionally, electronics options such as the 26LS31 or 88C30 driver are available to accommodate different control protocols.
Properties
| Feature | Specification |
|---|---|
| Sensor Type | Incremental |
| Main Application | Engines |
| Standard Feeding | 5÷30V DC |
| Axis | Ø 6÷15mm Passthrough (Stainless Steel) |
| Weight | 300 g |
| Maximum Radial Load | 6 kg |
| IP Protection Output | 64 (Standard) / 65 (Sealed) |
| Maximum Continuous RPM | 6000 rpm |
| Minimum Starting Torque | 85 gcm |
| Bearing Life | High (MTTFd) |
| Impact Resistance | 50 G x 11ms |
| Vibration Resistance | 12 G (10 ÷ 2000 Hz) |
| Operating Temperature | 0 ÷ 70 °C |
| Pulses for Revolution | 1 ÷ 50000 |
| Maximum Frequency | 100 kHz (300 option) |
Other products
