Robust Incremental Encoder I/50FL

Metal housing | Mounting feet | Stainless steel Ø10 shaft | 10 to 3600 pulses/revolution | Max. frequency 180 kHz | Power supply 5–24 V | NPN, open collector NPN and push-pull electronics | IP52 shaft side | 5000 rpm continuous | Weight 350 g

Manufacturer: ELCIS Encoder
Category: Encoder, Incremental Encoder, Robust Incremental Encoder, SENSORS

Compact, all-metal incremental encoder equipped with mounting feet for easy installation. Robust and suitable for industrial applications.

Housed in a metal casing with mounting feet, the I/50FL offers 10 to 3600 pulses per revolution, a maximum frequency of 180 kHz, and NPN, open collector NPN or push-pull electronics, powered between 5 and 24 V.

Steel base and cover, and Ø10 stainless steel shaft supporting 3.5 kg of radial/axial load. Operates from -10 to +70 °C with IP52 protection on the shaft side and connects via a miniature 5-pin connector (IP64) or a cable end connector (IP65), both with radial output. Available in guemisa.es.

Resolution of 10 to 3600 pulses per lap and frequency up to 180 kHz.
Nutrition 5 to 24 V.
NPN, NPN open collector and push-pull output electronics.
Until 5000 rpm continuous.

Technical Frequently Asked Questions

What signal version does the I/50FL offer?

Bidirectional + zero (BZ).

What supply voltages does it support?

5 V ±5 % and 12–24 V.

How do I connect the I/50FL?

By miniature 5-contact connector (CEK, IP64) or by cable end connector (7, 10, 9, 12 or 5 contacts, IP65), always with radial output.

Properties

Feature	Specification
Mechanics
Housing	Metallic, with fixing legs
Weight	350 g
Axis	Ø10 stainless steel
max radial/axial load.	3,5 kg
Electric
Exit-side protection	According to connection: IP64 with CEK connector, IP65 with connector at cable end (see page 2)
Feeding	5–24 V (see page 2)
Max. consumption.	60 mA standard · 50 mA line driver
Impulses per lap	10 to 3600
Max frequency.	180 kHz
Protection and environment
axle-side protection	IP52 (without sealed or low-torque option)
max. continuous RPM	5000 (intermittent: +30 %; no sealed or low-torque option)
Impact resistance	50 G × 11 ms
Vibration resistance	12 G (10–2000 Hz)
Operating temperature	-10 … +70 °C
Storage Temp.	-30 … +85 °C

Other products

A/963C Fieldbus Absolute Encoder

Aluminum housing with 63 mm square flange | CANopen (C2) or CAN fiber optic (CF) interface | Max. transmission speed 1 MBaud | Max. resolution 16 bits/revolution · 30 bits in 16384 revolutions | Binary output code | Power supply 10–30 V DC, max. consumption 2.5 W | Ø10 h8 shaft in stainless steel | Max. radial/axial load 40/110 N | IP64 protection on shaft (IP66 sealed) | Operating temperature -40 … +85 °C

Encoder, Absolute Encoder, Absolute Encoder Fieldbus, SENSORS

Dual Range Torque Sensor DF Dual 4 | 4,000-5,000 Nm | 15,000 RPM

Dual Inductive Metrology | Limit 5,000 N·m | 15,000 RPM | PCD Flange 155.5 mm | Accuracy 0.05% | Inertia 0.0165 kg·m²

Very high torque (10,000-150,000 Nm), Rotary, Torque sensor

Explosion-Proof Single-Turn Absolute Encoder A/0L80EXS

ATEX Ex d IIC T6 Gb certified | Internal coupling | Hollow stainless steel shaft (Ø6–12 mm) | Single-turn, 7 to 12-bit | Up to 4096 steps per revolution | Parallel, serial SSI (RS422), or analog output | Standard IP65 and IP66 on the shaft with Z-axis option | Max. radial/axial load: 10 kg | Power supply: 5 V, 15 V, 8–24 V, or 18–28 V | Ambient temperature (T6): -20 to +40 °C

Encoder, Absolute Encoder, ATEX Absolute Encoder, SENSORS

LTFM-120 Flowmeter

Transit time ultrasonic flow meter

Caudal, SENSORS

Dual Resolution Incremental Encoder I/63MP

Housing Ø63 mm | Shaft Ø9.52 h7 stainless steel | Up/down counting with imperial or metric increments | 100/127 to 2000/2540 pulses/revolution | Max. frequency 100 kHz | Driver electronics 26LS31 | IP65 shaft side (IP66 sealed) | 6000 rpm continuous | Operating temp. 0 to +70 °C | Weight 600 g

Encoder, Incremental Encoder, Dual Resolution Incremental Encoder, SENSORS

TRS-0050

Novotechnik TRS-0050 potentiometric linear sensor · reference 400023272 · travel 0…50 mm · M16 connector · spring return

Displacement, SENSORS, Potentiometric linear sensors

Incremental Encoder for I/48 Motors

Miniature Ø48 mm | Internal helical coupling | Hollow shaft Ø4 to Ø8 mm in Ergal | Electrical and mechanical zero alignment | 1 to 2540 imp/v | Max. frequency 60 kHz (75 or 100 kHz optional) | Anodized aluminum | Weight 180 g | 6000 rpm continuous (3000 rpm with Z option) | NPN, PNP, Push-pull and Line Driver outputs

Encoder, Incremental Encoder, Incremental Encoder for Motors, SENSORS

M38 Incremental Magnetic Encoder

Aluminum housing Ø38 mm | Resolution from 8 to 2048 pulses/rotation | Bidirectional version with zero (BZ) | Up to 12000 continuous rpm (option B) | Ø6.35 h7 stainless steel spindle | Shaft-side protection IP64 / IP66 sealed (Z) | Oil and liquid immunity | Line Driver 26LS31, ET7272 and NPN electronics | Impact resistance 100 G (6 ms) | Power supply 5÷30 V

Encoder, Incremental Encoder, Incremental Magnetic Encoder, SENSORS

A/990FS Multi-Turn Absolute Encoder

Hollow shaft Ø10 H7 (opt. Ø6, Ø8, Ø9.52) | Internal star coupling | SSI serial interface (RS422) | Resolution up to 30 bits in 16384 turns | Gray or Binary codes | Power supply 10–30 VDC | IP65 protection (IP66 sealed shaft) | Step frequency 800 kHz | Weight 1400 g | Max. radial/axial load 70/110 N

Encoder, Absolute Encoder, Multi-turn Absolute Encoder, SENSORS

Dimetix Sensor Accessory Starter Kit

Quick Start Package, Power and Connectivity Laser Range: Comprehensive equipment for interactive bench setups and preliminary testing

Signal converters, Displacement, INSTRUMENTATION, SENSORS, Laser distance sensors, Level Sensors