Dual Resolution Incremental Encoder I/63MP
- Manufacturer: ELCIS Encoder
- Category: Encoder, Incremental Encoder, Dual Resolution Incremental Encoder, SENSORS
In demanding industrial environments, the need for highly accurate position and speed measurements on heavy machinery is critical. The I/63MP Dual Resolution Incremental Encoder solves this problem by offering a robust architecture designed to withstand the vibrations and mechanical loads typical of heavy-duty work without compromising signal integrity.
The technical solution incorporates a Ø9.52mm stainless steel shaft capable of supporting up to 10 kg of radial load. The internal electronics allow output configurations ranging from standard PNP to 88C30 line driver, operating at maximum frequencies of 100 kHz and with a ball bearing life of 1.5 x 10^9 revolutions to ensure long-term stability.
Constructed with an anodized aluminum base and a Valox 420 cover, the device withstands operating temperatures between 0 and 70°C and impact resistance up to 50 G. This robustness allows for direct installation in motor control and precision positioning systems. Available in guemisa.es.
- Anodized aluminum base and Valox 420 lid for industrial durability.
- Impact resistance up to 50 G x 11ms and vibration resistance of 12 G.
- Guaranteed service life of 1.5 x 10^9 revolutions ball bearings.
- Maximum operating frequency of 100 kHz with 300 kHz option available.
Technical Frequently Asked Questions
How does the standard version differ from the sealed I/63MP model?
The standard model has IP65, while the 'z' (sealed) option reaches IP66. Both share the same Ø9.52mm shaft and weight of 570g, but the sealing adds dust protection for harsher environments without changing the internal electronics or the available pulse resolution.
What alignment precautions are required for the I/63MP shaft during assembly?
The Ø9.52mm stainless steel shaft supports a maximum radial load of 10 kg. Precise alignment is crucial to avoid excessive axial loads that could reduce the lifespan of the ball bearings, which are designed for 1.5 x 10^9 revolutions under optimal conditions.
What connectors and output options are available for the I/63MP?
The catalog offers multiple connectors such as VH5VI (12-pin) or EM terminal boxes, as well as configurable outputs ranging from standard PNP to 88C30 line driver. Versions with unbreakable discs or low-torque bearings can also be ordered according to the specific needs of the mechanical system.
Properties
| Feature | Specification |
|---|---|
| Sensor Type | Incremental (Double Resolution) |
| Main Application | Motor control and precise positioning |
| Standard Feeding | 5V ±5% (Optional 8÷24V) |
| Axis | Ø 9.52mm Stainless Steel |
| Maximum Radial/Axial Load | 10 kg |
| Maximum Continuous RPM | 6000 RPM (Intermittent 12000) |
| Starting Torque | > 18 gcm |
| Bearing Life | 1.5 x 10^9 revolutions |
| Impact Resistance | 50 G x 11ms |
| Vibration Resistance | 12 G (10 ÷ 2000 Hz) |
| Operating Temperature | 0 ÷ 70 °C |
| Storage Temperature | -30 to 85 °C |
| Number of Impulses/Revolution | 1 ÷ 25000 PPR |
| Maximum Frequency | 100 kHz (300 kHz option) |
| Standard IP Protection | IP65 (IP66 Sealing Option) |
Other products
