HPS-Sxx
Miniature size wire displacement sensor, ranges 250, 500, 750, 1000 mm
- Manufacturer: DPF Sensors
- Category: Displacement, Linear by thread, SENSORS
Miniature size wire displacement sensor, ranges of 250, 500, 750, 1000 mm, output signal resistance 5 Kohm, linearity 0.25%
Properties
Other products
Linear potentiometric probe sensor • 0…50 mm • spring return • cable output
41 mm square flange | Shaft Ø6.35 h7, centered Ø13.89 h7 | 1–2540 imp/rev | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP64 shaft (IP66 sealed) | 60 kHz (100 kHz optional)
Cantilever wheel, C = 200 mm | Wheel Ø63.66 mm with preload | 1 to 5000 imp/v | NPN, PNP, push-pull or line driver | 5–30 V | IP64 shaft (IP66 sealed) | 60 kHz (100 kHz optional)
B10 flange, Ø11 h7 shaft | Up to 65536 steps × 16384 revolutions | SSI or SSI with preset, Gray/binary | 10–30 V power supply | IP64 shaft (IP66 sealed) | 800 kHz step frequency | ±½ LSB accuracy (<13 bit)
Inductive (Dual-Frequency) | 500 N·m – 4,000 N·m | Up to 40,000 RPM | PCD Flange 105.0 mm
PH sensor for range 0 to 13pH with 9m cable Compatible with all controllers on the market
Range 2mS to 20S, For use in line with DIN11851 connector and C565.2 or C7685 controller.
Dual Output | 4-20mA + AC Output | Configurable Speed Range | 2Hz-1kHz Frequency | 12-32V DC Power Supply | -25 to 90°C Temperature | IP67 Protection | Stainless Steel | Insulated Base | 3-pin Connector | 62GB
Eje hueco Ø10 H7 (otros por código) | Acoplamiento tangencial | 1 a 10000 imp/vuelta | NPN, PNP, push-pull, line driver | 5–30 V | IP66 eje sellado | ATEX II 2 G D, Ex d IIC T6/T5
Pinion with 13, 16, or 34 teeth or Ø8 shaft | Ø62 mm housing, without preload | 1 to 10,000 impedances/revolution | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP66 shaft side | Max. frequency 60 kHz (100 options)