HPS-SX
Wire displacement sensor, ranges from 100 mm to 1200 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection
- Manufacturer: DPF Sensors
- Category: Displacement, Linear by thread, SENSORS
Wire displacement sensor, ranges from 100 mm to 1200 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection
Properties
Other products
4/20mA RTD Isolator-Duplicator (Active/Passive)
Isolator-converter Input: 2 x 0-10 Vdc to Isolated output 2 x 0-4/20 mA active, Power supply: 24VDC (20.. 30V) isolated
2-way universal galvanic isolator/converter. Programmable input ranges (0/10 to 1000V), automatic 0-4/20mA output (active/passive). Power supply: 10 to 30 VDC.
Converter for averaging 4 RTD signals to 4/20mA
Universal converter for up to 4 load cells, in an IP65-rated housing. Isolated inputs with adjustable sensitivity for each cell. Multiple outputs: 0-4/20 mA and ± 0/10 V. Dual power supply: 24 VDC and 115/230 VAC.
Square flange 38×38, shaft Ø6.35 h7 | 8 to 2048 bpm/rotation | Line driver 26LS31/ET7272, NPN | Power supply 5, 8–24, 18–28, 10–30, 5–30 V | IP64 shaft (IP66 sealed) | 12000 rpm with low torque (option B) | Impacts 100 G (6 ms)
Industrial pressure sensor, -1.0 /…2.5 /0…6 /0…10 /…16 /0…25 /0…60 /… 100 /…250 /…400 /….600 Bar, 4-20 mA output, via M12 connector, 1/4″ thread
Voltage monitoring relay (VAC). Overvoltage and undervoltage.