DPT / DPT-LCD

Differential pressure transducer for air
Measure clean room pressure, flow rate, atmospheric pressure.

Properties

± 5 mbar ± 1 bar (special ranges)
0…50°C medium temperature
1.00 % accuracy
Output signal 4…20 mA, 0…10 Vdc
Differential pressure.
Pipe 3.5mm

Other products

Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Divisor de tensión | Ø 25,2 / 34 / 45,86 mm | Cursor para eje Ø 3 o Ø 6 mm | Ub máx. 42 VDC | 5 kΩ | 345°, 350° o 355°
Monitran-Logo
Dual Output | 4-20mA + AC Output | Configurable Speed Range | 2Hz-1kHz Frequency | 12-32V DC Power Supply | -25 to 90°C Temperature | IP67 Protection | Stainless Steel | Insulated Base | 3-pin Connector | 62GB
Dimetix_AG-1
It measures up to ~100 m over natural surfaces and up to 150 m with a reflector, with a typical accuracy of ±3 mm @2σ and a frequency of up to 100 Hz. It is geared towards position and level applications where ±1 mm accuracy is not required.
Precision digital inclinometer
RS232 Communication Extender-Amplifier-Isolator (Pair)
Dimetix_AG-1
Dynamic Industrial Communication Extension Module for DIN Rail Range: Effective range of the data bus extended up to 1200 meters (1.2 Km)
Wirelessly configurable RTD to 4/20mA converter (Active/Passive)
3-way isolator, input: 0-4/20mA (Active/Passive), output 0-4/20mA (with passive loop excitation), isolated output: 0-4/20mA (Active) 24VDC (20.. 30V) isolated power supply * 2 channels *
TDC, digital MEMS dynamic tilt sensor, can measure (roll ±180°, pitch ±180°, and azimuth ±180°) of a moving object. RS485 output signal. Withstands vibrations up to 2000g
Encardio Rite vibrating wire sensors and geotechnical instrumentation
Geotechnical monitoring system for structural monitoring and measurement of relative displacements in dams and large infrastructures.
Shopping Basket