NR1-1/2
RESISTIVE PROBES
- Manufacturer: Disibeint Electronic
- Category: SENSORS, Level Sensors, Level Sensors for Liquids
RESISTIVE PROBES NR1-1/2. PVC body material.
Properties
- Process connection: PVC threaded plug 1″1/2 G
- Electrical connection: DIN43650 connector
- Temperature: +70 ºC
- Pressure: 5 kg/cm² (at 20ºC)
- Protection: IP65
- Maximum 4 electrodes
- Polyolefine PE coated electrodes option
Other products
Displacement sensor with ball joints, different diameters depending on the application, range up to 300 and 1250 mm.
100% Digital Optical | 50 – 1,000 N·m | 30,000 RPM | Titanium Rotor
Eje hueco H7 Ø6, 8, 9,52 o 10 mm | Brida Ø72 mm | 1–1250 imp/vuelta | NPN, PNP, push-pull, driver, TTL | Alimentación 5–30 V | IP64 eje (IP66 sellado) | Detector y amplificadores dobles
Hilo Ø 0,51 mm | Carrera 750 o 1500 mm | Pot. 1 kΩ, 4–20 mA, 0–10 V, 0–5 V | Opción incremental (I) | Alim. 5, 12 o 24 V ±5 % | Linealidad ±0,25 % f.s. | IP54
Salida incremental | 4 pulsadores CNC, seta de parada | Conmutadores de resolución y eje | 100 imp/vuelta con enclavamiento | NPN, PNP, push-pull, driver | Alimentación 5 V u 8–28 V | IP64 eje (salida IP65)
B10 flange Ø115, centered Ø85 h7 | Shaft Ø10 h7 | 7 to 12 bit (up to 4096 steps) | Parallel, SSI RS422 or analog | 5, 15, 8–24 or 18–28 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6
Sección 18×46 mm | Carrera 70–1240 mm | Resolución 5, 1 y 0,5 µm (x4) | Salida line driver (VD) | Alimentación 5 V ±5 % | IP53 (IP64 con aire comprimido) | Precisión ±10 µm (opc. ±5 µm)
It measures up to ~100 m over natural surfaces and up to 150 m with a reflector, with a typical accuracy of ±3 mm @2σ and a frequency of up to 100 Hz. It is geared towards position and level applications where ±1 mm accuracy is not required.