M345NC Absolute Magnetic Encoder

Budget-friendly price Request a quote
Contactless: magnet in hollow shaft | Hollow shaft Ø4, 5, 6, 8 or 10 mm | Housing 45×45 mm | 8192 steps/revolution (13 bits) | SSI (RS422), natural binary | Power supply 5 V, 5–30 or 10–30 V | IP67 shaft, 30000 rpm

The ELCIS M345NC is a single-turn absolute magnetic encoder with no contact between the rotating shaft and the transducer body, operating at a speed of 30,000 rpm. It is suitable for industrial applications such as marine, medical, printing, metalworking, industrial automation, and instrumentation.

Natural binary output via SSI serial interface with RS422 transmission standard. Maximum frequency 500 kHz and maximum current consumption 35 mA. Available resolutions: 32, 64, 128, 256, 512, 1024, 2048, 4096, and 8192 steps per revolution, and decimal values 40, 80, 100, 160, 200, 320, 400, 500, 800, 1000, 1600, and 2000. Custom options available upon request (code X).

Aluminum base and cover, 45×45 mm, with independent magnetic actuator for hollow shaft of Ø4, Ø5, Ø6, Ø8 or Ø10 mm. Standard IP67 protection on the shaft side and IP65 on the output with 1 m CV cable. Impact resistance of 100 G (6 ms) and operating temperature of -25 to +85 °C.

  • No contact between the rotating shaft and the transducer body.
  • Rotation speed of 30000 rpm continuous (intermittent: +30 %).
  • Resolution up to 13 bits (8192 steps/turn) with exit SSI series (RS422).
  • Protection IP67 standard on the axle side and aluminum base and cap 45×45 mm.
  • Hollow shaft with magnet Ø4, 5, 6, 8 or 10 mm.

Technical Frequently Asked Questions

What rotation speed does the M345NC support?

30,000 rpm continuous; maximum intermittent RPM is 30 % higher than continuous RPM. Bearing life is 1.5 × 109 revolutions (at 1000 rpm and with a load of 1/4 of the maximum allowed).

What hollow shaft diameters does the magnetic actuator support?

Hollow shaft of Ø4, Ø5, Ø6, Ø8 or Ø10 mm.

What communication interface and data format does the M345NC encoder use?

It uses SSI synchronous serial interface under the RS422 physical standard, delivering position data in natural binary code with an external clock of up to 500 kHz.

Properties

FeatureSpecification
Mechanics
Weight150 g
AxisGap with magnet (Ø4, Ø5, Ø6, Ø8, Ø10 mm) (customizable upon request)
Electric
Exit-side protectionIP65 with CV cable
Max resolution.8192 steps/turn (13 bits)
Exit codeNatural binary
Max frequency.500 kHz
Feeding5 V ±5 % · 5÷30 V · 10÷30 V
Max. consumption.35 mA
Direction of rotationNon-switchable (up/down)
InterfaceSSI Series (RS422)
Protection and environment
axle-side protectionIP67 standard
max. continuous RPM30000 rpm (intermittent: +30 %)
Impact/vibration resistance100 G (6 ms) · 12 G (10 ÷ 2000 Hz)
Operating/storage temperature-25 … +85 °C / -25 … +125 °C
Other features
Zero mechanical searchNo
ELCIS M345NC Single-Turn Absolute Magnetic Encoder
Dimensional drawing of the ELCIS M345NC single-turn absolute magnetic encoder

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Low profile Ø68 mm | Servo clamp mounting | Ø6 h7 stainless steel shaft | 1 to 10000 pulses/revolution | NPN, PNP, push-pull, driver, TTL | 5–30 V power supply | IP64 shaft, IP66 seal
Monitran-Logo
1000 mV/g ±5% | Constant current 0.5 to 8 mA | 5 Hz to 12 kHz ±10% | ±10 g | 11 g | -55 to 120 °C | 16 x 14 x 14 mm cube | BNC, IP65
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange 44×44 mm, shaft Ø6 h7 | 8192 steps/revolution (13 bits) | SSI (RS422), natural binary | Power supply 5 V, 5–30 or 10–30 V | IP66 shaft (IP53 with low torque) | Max. frequency 500 kHz | Impacts 100 G (6 ms)
DPF Sensors logo
Combined humidity and temperature sensor, high quality sensor, duct and outdoor.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow spindle H7 Ø6, 8, 10, 12 or 15 | Up to 65536 steps × 4096 revolutions | SSI with preset, Gray or binary | Optional Sin/Cos 1024 or RS422 16384 ppr | Power supply 10–30 V | IP64 spindle (IP66 sealed) | Anti-rotation pin
AIVIM logo
Electrochemical Technology | -10 °C to +150 °C (SIP) | Stainless Steel and PEEK | DIN/ISO Clamp Connection
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft H7 up to Ø10 | Ø59, star coupling | Up to 2048 steps (11 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP66 sealed)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft H7, tangential pin | SSI with preset, RS422 | Up to 65536 steps (16 bits) | Gray or binary programmable | 10–30 V | IP64 shaft (IP66 sealed) | Optional Sin/Cos 1024 or RS422 16384 ppr
LVDT Manufacturer Logo Schreiber Messtechnik
Amplified LVDT | Range 80 to 360 mm | Stainless Steel Housing Ø 25 mm | IP66 | Outputs 4-20mA / ±10V | Clamp Mounting
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental output | Servo flange type | 100 impedances/revolution with latching | 1–2500 impedances/revolution (option F) | NPN, PNP, push-pull, driver | Power supply 5–30 V depending on version | IP65 shaft side (output IP00–IP67)
Shopping Basket