M344Q Absolute Magnetic Encoder

Budget-friendly price Request a quote
Square flange 44×44 mm, shaft Ø6 h7 | 8192 steps/revolution (13 bits) | SSI (RS422), natural binary | Power supply 5 V, 5–30 or 10–30 V | IP66 shaft (IP53 with low torque) | Max. frequency 500 kHz | Impacts 100 G (6 ms)

El ELCIS M344Q es un encoder magnético absoluto monovuelta con brida cuadrada, carcasa Ø44 mm y resolución de hasta 13 bits. Tiene 62 mm de longitud y 8192 pasos por vuelta. Aplicaciones industriales como marino, médico, artes gráficas, trabajo de metales, automatización industrial e instrumentación.

Output in natural binary code via SSI serial interface with RS422 transmission standard. Max. frequency 500 kHz and max. consumption 35 mA.

Carcasa de aluminio con brida cuadrada de 44×44 mm, centrado Ø20 h7 y eje de acero inoxidable Ø6 h7. Velocidad máx. continua de 3000 rpm con IP66 en el lado del eje y de 12000 rpm con rodamientos de bajo par (IP53). Temperatura de funcionamiento de -25 a +85 °C.

  • Technology absolute magnetic single-turn up to 13 bits (8192 steps/turn).
  • Fixation by means of 44×44 mm square flange with centering of Ø20 h7.
  • 3000 rpm continuous with IP66 on the shaft side; 12000 rpm with low torque bearings (IP53). Impact resistance of 100 G.
  • Exit SSI series (RS422) with maximum frequency of 500 kHz.
  • Feeding 5 V ±5 %, 5÷30 V either 10-30 V.

Technical Frequently Asked Questions

What type of mechanical fastening does the M344Q model have?

The M344Q model incorporates a 44×44 mm square front flange with Ø20 h7 cylindrical centering and 4 holes of Ø3.5 mm.

What communication interface and data format does the M344Q encoder use?

It uses an SSI serial interface with RS422 transmission standard. The output code is natural binary, and data is transmitted starting from the most significant bit (MSB) using an external clock. Maximum frequency: 500 kHz.

What rotation speed and IP rating options does it offer?

It offers 3000 rpm with IP66 protection as standard and up to 12000 rpm continuous with IP53 protection in its variant B with low torque bearings.

Properties

FeatureSpecification
Mechanics
Weight120 g
AxisØ6 h7 stainless steel (customizable upon request)
max radial/axial load.1 kg
Electric
Exit-side protectionIP65 with CV cable
Max resolution.8192 steps/turn (13 bits)
Exit codeNatural binary
Max frequency.500 kHz
Feeding5 V ±5 % · 5÷30 V · 10÷30 V
Max. consumption.35 mA
Direction of rotation / mechanical zeroNon-switchable (up/down) · Mechanical zero search: no
InterfaceSSI Series (RS422)
Protection and environment
axle-side protectionIP66 standard · IP53 low torque
max. continuous RPM3000 standard · 12000 low torque (intermittent: +30 %)
Impact/vibration resistance100 G (6 ms) · 12 G (10 ÷ 2000 Hz)
Operating/storage temperature-25 … +85 °C / -25 … +125 °C (customizable upon request)
ELCIS M344Q Single-Turn Absolute Magnetic Encoder
Dimensional drawing of the ELCIS M344Q single-turn absolute magnetic encoder

Related documentation, cases, and guides

Other products

DPF Sensors logo
Resistive linear position sensor with spring probe • up to 200 mm • ±0.1 % FS
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Ø8 h7 | 80 mm square flange | 1 to 1024 imp/rev | NPN, push-pull or line driver | Power supply 5–30 V | IP54 shaft (IP65 Z-seal) | Max. frequency 60 kHz
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
13 or 16 tooth pinion | With integrated pinion preload | Linear resolution 0.001 to 1 mm | 1 to 10000 impedances/revolution | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft (IP66 sealed)
DPF Sensors logo
Digital pressure transducer
ATESTEO LOGO, manufacturer of torque sensors
60 · 70 · 80 kN·m | Clase 0,10 % | 10 000 rpm | Rotor Ø378 mm | Taladros 340,00 / 275,00 mm | RS422, tensión, corriente, bus CAN
ATMOSPHERIC pressure transducer
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Combined glass/gel pH reference electrode, with 1.5m cable and BNC connector, double ceramic junction for high temperature
Shopping Basket