Standard Incremental Encoder I/68

Budget-friendly price Request a quote
Low profile Ø68 mm | Servo clamp mounting | Ø6 h7 stainless steel shaft | 1 to 10000 pulses/revolution | NPN, PNP, push-pull, driver, TTL | 5–30 V power supply | IP64 shaft, IP66 seal

The ELCIS 68 (I/68) is a low-profile incremental encoder with a 68 mm diameter shaft, 6 h7 diameter, and 1 to 10,000 pulses per revolution, designed for very shallow locations. It features servo-type mounting using clamps. The base and cover are made of anodized aluminum, and the encoder weighs 300 g and has a 2 kg radial/axial load on its stainless steel shaft. It operates from 0 to +70 °C with IP64 protection on the shaft side (IP66 sealed, IP53 under torque) and connects via cable, connector, or cable end connector. The encoder uses NPN, PNP, push-pull electronics, 26LS31 and 88C30 drivers, TTL 7404, and a 1 Vpp sinusoidal output, and is powered by 5 to 30 V depending on the version, with a maximum frequency of 100 kHz (300 kHz optional).

In a Ø68 mm housing, the I/68 offers from 1 to 10000 pulses per revolution, a maximum frequency of 100 kHz (300 kHz optional) and NPN, PNP, push-pull output electronics, 26LS31 and 88C30 drivers, TTL 7404 and 1 Vpp sinusoidal output, powered between 5 and 30 V depending on the version.

Anodized aluminum base and cover and stainless steel shaft Ø6 h7 that supports 2 kg of radial/axial load. It works from 0 to +70 °C with IP64 protection on the shaft side (IP66 sealed, IP53 under torque) and is connected by cable, connector or cable end connector.

  • Resolution of 1 to 10000 pulses per lap and frequency up to 100 kHz (300 kHz optional).
  • Nutrition 5 to 30 V according to the version.
  • NPN, PNP, push-pull output electronics, 26LS31 and 88C30 drivers, TTL 7404 and sinusoidal 1 Vpp.
  • Until 12000 rpm continuous with low torque bearings and 6000 rpm in standard version.

Technical Frequently Asked Questions

What signal versions does the I/68 offer?

Unidirectional (M), bidirectional (B), bidirectional + zero (BZ) and unidirectional + zero (MZ).

What supply voltages does it support?

5 V ±5 %, 8–24 V, 18–28 V, 8–15 V, 12 V ±5 %, 24 V ±5 %, 12–30/12 V, 8–24/5 V, 10–30 V, 18–28/5 V and 15–30/15 V. With 88C30 driver, maximum 15 Vdc.

Does the length of the I/68 change depending on the version?

The length dimension of the plane, from 36.5 mm, increases to 38 mm with more than 2500 pulses per revolution and to 43.5 mm with connector (CM) ÷ (CD).

Properties

FeatureSpecification
Mechanics
HousingØ68 mm
Weight300 g
AxisØ6 h7 stainless steel (customizable upon request)
max radial/axial load.2 kg
Electric
Exit-side protectionDepending on the connection: IP63 to IP67 (see technical data sheet)
Feeding5–30 V according to version (see technical specifications)
Max. consumption.120 mA Standard · 180 mA line driver (customizable upon request)
Impulses per lap1 to 10000
Max frequency.100 kHz (300 kHz optional)
Protection and environment
axle-side protectionIP64 standard • IP66 sealed (Z) • IP53 low torque (B)
max. continuous RPM6000 standard · 3000 sealed · 12000 low torque (intermittent: +30 %)
Impact resistance50 G × 11 ms
Vibration resistance12 G (10–2000 Hz)
Operating temperature0 … +70 °C (customizable upon request)
Storage Temp.-30 … +85 °C
ReferenceConfiguration
I/68-1024-815-BB-CV-RI681024815BBCVR1024 pulses/revolution · 8–15 V · bidirectional · Push-pull PRO · 1 m cable · IP65 · radial output
I/68-2048-5-BZ-N-CDI6820485BZNCD2048 pulses/revolution · 5 V ±5 % · bidirectional + zero · Driver 26LS31 · 9-pin sub-D connector · IP63 · axial output
I/68-2500-5-BZ-N-CV-R-07I6825005BZNCVR072500 pulses/revolution · 5 V ±5 % · bidirectional + zero · Driver 26LS31 · Cable · IP65 · radial output
I/68-50-1828-B-CD-RI68501828BCDR50 pulses/revolution · 18–28 V · bidirectional · standard NPN · 9-pin sub-D connector · IP63 · radial output
I/68-5000-5-BZ-N-CV-R-01I6850005BZNCVR015000 pulses/revolution · 5 V ±5 % · bidirectional + zero · Driver 26LS31 · Cable · IP65 · radial output
I/68-5000-824-MK-CV-R-01I685000824MKCVR015000 pulses/revolution · 8–24 V · unidirectional · NPN open collector · Cable · IP65 · radial output
I/LY68-1000-824-MK-CV-R-0.20ILY681000824MKCVR020Low temperature · Unbreakable disc · 1000 pulses/revolution · 8–24 V · Unidirectional · NPN open collector · Cable · IP65 · Radial output
I/LY68-1000-824-MK-CV-R-01ILY681000824MKCVR01Low temperature · Unbreakable disc · 1000 pulses/revolution · 8–24 V · Unidirectional · NPN open collector · Cable · IP65 · Radial output
I/X68-50-1828-BZ-B-CD-RIX68501828BZBCDRCustom option · 50 pulses/return · 18–28 V · Bidirectional + zero · Push-pull PRO · 9-pin sub-D connector · IP63 · Radial output
Standard incremental encoder ELCIS I/68
Dimensional drawing of the standard ELCIS I/68 incremental encoder

Related documentation, cases, and guides

Other products

Monitran-Logo
Industrial eddy current probe | Linear range 0 – 5 mm | Sensitivity 3.6 mV/µm nominal | DC to 10 kHz | EP200: M16 thread, Ø13 mm | EP200F: PEEK housing | -30 °C to 180 °C (probe)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow spindle H7 Ø6, 8, 10, 12 or 15 | Up to 65536 steps × 4096 revolutions | SSI with preset, Gray or binary | Optional Sin/Cos 1024 or RS422 16384 ppr | Power supply 10–30 V | IP64 spindle (IP66 sealed) | Anti-rotation pin
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Ø8 h7 | Housing Ø55 mm | 1 to 1000 imp/rev | NPN, PNP, push-pull or driver | Power supply 5–30 V | IP64 shaft (IP66 Z-sealed) | 40 kHz (75 kHz optional)
Monitran-Logo
Industrial driver for MTN/EP probes | Voltage or 4-20 mA 2-wire output | -24V, +24V, or 24VDC | AC vibration 5 Hz – 1 kHz | -20 °C to 80 °C | Calibrated with SAE4140 steel | 450 g
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
IO-Link | Ø 30 mm | 16 bits per revolution | Shaft Ø 6 mm | 24 VDC (16 … 30 VDC) | IP54 … IP67 | Measuring range: 44 revolutions (15840°)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø65, shaft Ø10 h7 | SSI with preset, RS422 | Up to 65536 steps (16 bits) | Gray or binary programmable | 10–30 V | IP65 shaft (IP66 sealed) | Optional Sin/Cos 1024 or RS422 16384 ppr
LVDT Manufacturer Logo Schreiber Messtechnik
LVDT inductive probe | Strokes from 4 to 20 mm | Body Ø10 mm | Clamping Ø8 h8 | Linearity up to 0.25 % | Repeatability ±6 µm | IP66 | LEMO, M12 or cable
Monitran-Logo
Speed 0-50 mm/s (ISO 10816) | 5 Hz to 1 kHz | 2 alarm levels AL1/AL2 | 8 A relays | 4-20 mA output | 24 V DC / 110 / 230 V AC | IP54
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through-shaft Ø16–30 H7 | Ø90 mm, centered Ø80 h7 | 1–36000 imp/rev | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP65 shaft | 100 kHz (500 kHz optional)
Shopping Basket