M338 Absolute Magnetic Encoder

Budget-friendly price Request a quote
Housing Ø38 mm, spindle Ø6.35 h7 | 8192 steps/revolution (13 bits) | SSI (RS422), natural binary | Power supply 5 V, 5–30 or 10–30 V | IP64 spindle (IP66 sealed) | 12000 rpm with low torque (option B) | Impacts 100 G (6 ms)

El ELCIS M338 es un encoder magnético absoluto monovuelta de hasta 13 bits y hasta 12000 rpm. Para aplicaciones industriales como marina, médica, artes gráficas, trabajo del metal, automatización industrial e instrumentación.

Natural binary output via SSI serial interface with RS422 transmission standard. Data output is controlled by an external clock and transmitted from the MSB. Max. frequency 500 kHz; max. current consumption 35 mA.

Carcasa y tapa de aluminio de Ø38 mm, con fijación en Ø25,4 mm, y eje de acero inoxidable Ø6,35 h7. Velocidad de hasta 12000 rpm continuas con rodamientos de bajo par (opción B), IP66 en el lado del eje con rodamientos sellados (opción Z) y temperatura de funcionamiento de -25 a +85 °C.

  • Technology absolute magnetic single-turn up to 13 bits (8192 steps/turn).
  • Casing Ø38 mm and weight of 100 g.
  • Until 12000 rpm continuous (option B, under par); 6000 rpm standard and 3000 rpm sealing (option Z).
  • Exit SSI series (RS422), max. frequency. 500 kHz.
  • axle-side protection IP64 standard, IP66 sealed (Z) and IP53 low torque (B); feed 5 V ±5 %, 5÷30 V or 10÷30 V.

Technical Frequently Asked Questions

What communication interface and data format does the M338 encoder use?

It uses an SSI serial interface with RS422 transmission standard and natural binary code. Data output is controlled by an external clock, and angular position is transmitted starting from the most significant bit (MSB). The maximum frequency is 500 kHz.

What rotation speed and IP rating options are available?

It offers 6000 rpm with IP64 in the standard version, 3000 rpm with IP66 protection (option Z with sealed bearings) and up to 12000 continuous rpm with IP53 (option B with low torque bearings).

What supply voltages does the M338 encoder support?

It is available with 5V ±5 %, 5÷30V and 10÷30V power supplies, with a maximum consumption of 35mA.

Properties

FeatureSpecification
Mechanics
Weight100 g
AxisØ6.35 h7 stainless steel (customizable upon request)
max radial/axial load.1 kg
bearing life1.5 × 10⁹ rev (at 1000 rpm and 1/4 max. load)
Direction of rotation / mechanical zero searchNon-switchable (up/down) · No mechanical zero search
Electric
Exit-side protectionIP65 with CV cable
Max resolution.8192 steps/turn (13 bits)
Max frequency.500 kHz
Feeding5 V ±5 % · 5÷30 V · 10÷30 V
Max. consumption.35 mA
InterfaceSSI Series (RS422), natural Binary code
Protection and environment
axle-side protectionIP64 standard • IP66 sealed • IP53 low torque
max. continuous RPM6000 standard · 3000 sealed · 12000 low torque (intermittent: +30 %)
Impact/vibration resistance100 G (6 ms) · 12 G (10 ÷ 2000 Hz)
Operating/storage temperature-25 … +85 °C / -25 … +125 °C (customizable upon request)
ELCIS M338 Single-Turn Absolute Magnetic Encoder
Dimensional drawing of the ELCIS M338 single-turn absolute magnetic encoder

Related documentation, cases, and guides

Other products

Monitran-Logo
Industrial eddy current probe | Linear range 0 – 8.5 mm | Sensitivity 2 mV/µm nominal | DC to 10 kHz | EP340: M24 thread, Ø20 mm | EP340F: Ø40 mm body with 3 holes | -30 °C to 180 °C (probe)
NESA Environmental Meters
Heavy | Liquid, solid, and mixed precipitation | 200/400 cm² | 1500 mm | 0.1% fs | 0–2 Vdc, 4–20 mA, RS485 / Modbus RTU | 10–28 Vdc
DPF Sensors logo
The BPSE load cell, used to measure compressive forces in industrial applications, especially test benches. Measuring ranges from 500 kg to 350 tons.
DPF Sensors logo
Anemometer with pulse output, proportional to wind speed, industrial use
NESA Environmental Meters
0-2Vdc · 4-20mA · RS485 / Modbus | Dry / Wet: 0-100% | Accuracy ±0.5% | Surface 28cm² | Time constant 2 s | -30 ÷ +60°C | Sensing area 50×70 mm
NESA Environmental Meters
Piezometric capsule, NTC | 0–20 bar | -5–+80 °C | <0.5% fs or better | 2 x 4–20 mA | Current loop or 10–28 Vdc | 316 stainless steel
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø58 mm, square flange | Ø6 h7 stainless steel shaft | 1 to 25000 pulses/revolution | NPN, PNP, push-pull, driver, TTL | 5–30 V power supply | IP64 shaft, IP66 sealed | 100 kHz (300 kHz optional)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Incremental A/B/Z, RS-422 | Ø 36 mm | 1024 ppr (4096 counts) | Shaft Ø 6 mm, Ø 10 mm or hollow Ø 6 mm | 5 VDC (4.5 … 5.5 VDC) | IP67 / IP6K9K
Shopping Basket