BPSE
Budget-friendly price Request a quote
The BPSE load cell, used to measure compressive forces in industrial applications, especially test benches. Measuring ranges from 500 kg to 350 tons.
- Manufacturer: DPF Sensors
- Category: SENSORS
The load cell BPSE, used to measure compressive forces in industrial applications, especially test benches.
Operating principle: It works by deforming a metal, such as steel or stainless steel, with a piezoresistive sensor generating an electrical signal proportional to the applied force. For tensile use, an accessory is required.
Measuring range: Available in various measurement ranges, from 100 kg to 300 tons.
Applications: They are used in a wide variety of industrial applications, but due to their precision, they are widely used in test benches and hydraulic presses.
Properties
Related documentation, cases, and guides
Other products
Wirelessly configurable RTD to 4/20mA converter (Active/Passive)
4 electrodes, K=1cm-1 (2 to 2,000mS) 1″ BSP thread, PVC body material, PT-100 for temperature measurement, up to 80ºC, 7pin connector
Hollow shaft H7 up to Ø15 | Ø59, tangential anti-rotation pin | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP66 sealed)
SPI, TTL level, binary code | Ø 28 mm | 16-bit resolution | Ø 6 mm spindle or push-in coupling | 5 VDC (4.5 … 5.5 VDC) | IP54 / IP65 / IP67 | 14 or 16 turns (up to 5760°)
Wire displacement sensor, ranges from 1000 mm to 4000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection
Combined glass/gel reference pH electrode, 9.5mm diameter Epoxy body and 1.5m cable with BNC connector.
Housing Ø58.5 mm, flange Ø63 | Shaft Ø9.52 h7 stainless steel | 1 to 25000 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP65 shaft (IP66 sealed) | 100 kHz (300 kHz optional)
Voltage output converter with amplified current
Early lightning warning | −100 … +100 kV/m | 3 s response time | 3 alarm levels | Modbus RS-485 | 6061 aluminum, Ø78 × 105 mm
Incremental output | 32-pole input (SM/AM heads) | II 2 G Ex d IIC T6 / T5 | D Ex tD A21 IP66 T85°C / T100°C | 1024 imp, 300 kHz max. | 5 V or 30 V line driver output | 5, 10–30 or 10–30/5 V power supply