A/958SP Absolute Fieldbus Encoder
- Manufacturer: ELCIS Encoder
- Category: Encoder, Absolute Encoder, Absolute Encoder Fieldbus, SENSORS
The ELCIS 958SP (A/958SP) is a PROFIBUS-DP absolute encoder, single-turn and multi-turn (single-rotation and multi-rotation), with a Ø58 mm diameter, servo flange, and Ø6 shaft. It is servo-mounted using front clips or screws.
The A/958SP is a single-turn or multi-turn absolute encoder with a PROFIBUS-DP Class 2 interface and RS485 line driver, with a transmission speed of up to 12 MBaud. It allows selection of 4096, 8192, 16384, 32768, or 65536 steps per revolution and 1, 4096, or 16384 revolutions, with a maximum of 30 bits in binary code. The address is programmed using selectors on the terminal box, and two LEDs indicate the status, with optical reading via LEDs and an IR photodiode array ASIC.
Built with a Ø58 mm aluminum housing and a Ø6 f6 stainless steel shaft (Ø10 optional), it supports radial and axial loads of 40 and 110 N. It has IP64 protection on the shaft side (IP66 in the sealed version), withstands impacts of 30 G and vibrations of 10 G, and operates from -40 to +85 °C.
- Interface PROFIBUS-DP Class 2 with RS485 line driver up to 12 MBaud.
- Resolution of up to 16 bit per turn and 30 bit in 16384 turns.
- Programmable steering with selectors and 2 LED of state.
- Nutrition 10–30 V DC with maximum consumption of 2.5 W.
Technical Frequently Asked Questions
What resolutions and lap times can the A/958SP be configured for?
It allows you to choose 4096, 8192, 16384, 32768 or 65536 steps per revolution and 1, 4096 or 16384 revolutions, with a maximum resolution of 30 bits at 16384 revolutions.
What parameters are programmable on the PROFIBUS-DP interface?
Direction of rotation (complement), resolution per revolution, total resolution, preset value, speed output and software limit switches.
What connections are available?
Connection cover with 3 IP65 cable glands (3PG), with 3 IP65 steel cable glands (3PG-VA) and with 2 cables and cable glands of Ø9–13 mm IP65 (2M20).
Properties
| Feature | Specification |
|---|---|
| Mechanics | |
| Housing | Aluminum, Ø58 mm (customizable upon request) |
| Weight | 550 g single turn · 600 g multiturn |
| Axis | Ø6 f6 stainless steel (optional Ø10) |
| max radial/axial load. | 40 / 110 N |
| Electric | |
| Exit-side protection | IP65 according to connection |
| Power supply / max. consumption. | 10–30 V DC · 2.5 W |
| LSB pitch frequency | 800 kHz |
| Exit code | Binary |
| Division accuracy | ±½ LSB (<13 bit) ±2 LSB (13–16 bit) |
| Max resolution. | 16 bit/turn · 30 bits in 16384 turns |
| Interface | PROFIBUS-DP Class 2 (DP) · RS485 · max. 12 MBaud |
| Protection and environment | |
| axle-side protection | IP64 standard · IP66 sealed |
| max. continuous RPM | 6000 standard · 3000 sealed (intermittent: +30 %) |
| Impact/vibration resistance | 30 G (11 ms) 10 G (10–1000 Hz) |
| Operating/storage temperature | -40 … +85 °C / -40 … +85 °C |
| Reference | Configuration |
|---|---|
| A/958SP-12-12-06-B-DP-0-3PGA958SP121206BDP03PG | 4096 steps/rev. · revolutions: 4096 · shaft Ø6 mm · Binary · PROFIBUS-DP Class 2 · Connection cover with 3 cable glands · IP65 |
| Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference. | |


Related documentation, cases, and guides
Other products








