Absolute Encoder Fieldbus A/9115C

Budget-friendly price Request a quote
CANopen (C2) or fiber optic (CF) | B10 flange, Ø11 h7 shaft | 16 bit; 30 bit in 16384 turns | Up to 1 Mbaud | 10–30 V DC | IP65 shaft (IP66 sealed)

The ELCIS 9115C (A/9115C) is a CANopen absolute encoder, single-turn and multi-turn (single-rotation and multi-rotation) with B10 flange and Ø11 shaft.

The A/9115C is a single-turn or multi-turn absolute encoder with a CANopen (C2) or fiber optic CAN (CF) interface and a CAN transceiver compliant with ISO 11898, with a transmission speed of up to 1 Mbaud. It allows selection of 4096, 8192, 16384, 32768, or 65536 steps per revolution and 1, 4096, or 16384 revolutions, with a maximum of 30 bits in binary code. Two LEDs indicate the status.

Built with an aluminum housing and a Ø11 h7 stainless steel shaft (others available upon request), it supports a radial/axial load of 180 N. It has IP65 protection on the shaft side (IP66 in the sealed version), withstands impacts of 30 G and vibrations of 10 G, and operates from -40 to +85 °C.

  • Flange B10 and stainless steel shaft Ø11 h7.
  • Interface CANopen until 1 Mbaud, also via fiber optics (CF).
  • Resolution of up to 16 bit per turn and 30 bit in 16384 turns.
  • CAN transceiver according to ISO 11898 and 2 LED of state.

Technical Frequently Asked Questions

What resolutions and laps does the A/9115C allow you to configure?

It allows you to choose 4096, 8192, 16384, 32768 or 65536 steps per revolution and 1, 4096 or 16384 revolutions, with a maximum resolution of 30 bits at 16384 revolutions.

What parameters are programmable in the CANopen interface?

Direction of rotation (complement), resolution, preset value, cams, 2 limit switches, speed, baud rate and CAN identifier; transmission mode polled, cyclic, sync or cos.

What connections are available?

IP65 Connection Cover (3PG); IP65 Connection Cover with LED (3PG-D); IP65 Connection Cover with 2 Cables (2M20); IP65 5-Pin Round Connector (1BW); Two IP65 5-Pin Round Connectors (2BW); Fiber Optic Connector (1HW).

Properties

FeatureSpecification
Mechanics
HousingAluminum (customizable upon request)
Weight1800 g single turn · 1900 g multiturn
AxisØ11 h7 stainless steel (others available upon request)
max radial/axial load.180 N
Electric
Exit-side protectionIP65 according to connection
Power supply / max. consumption.10–30 V DC · 2.5 W
LSB pitch frequency800 kHz
Exit codeBinary
Division accuracy±½ LSB (<13 bit) ±2 LSB (13–16 bit)
Max resolution.16 bit/turn · 30 bits in 16384 turns
InterfaceCANopen / CAN (C2) · optical fiber (CF) · max. 1 Mbaud
Protection and environment
axle-side protectionIP65 standard · IP66 sealed
max. continuous RPM6000 standard · 3000 sealed (intermittent: +30 %)
Impact/vibration resistance30 G (11 ms) 10 G (10–1000 Hz)
Operating/storage temperature-40 … +85 °C / -40 … +85 °C
ReferenceConfiguration
A/9115C-12-12-11-B-C2-0-3PGA9115C121211BC203PG4096 steps/rev. · Turns: 4096 · Standard Ø11 mm shaft · Binary · CANopen / CAN · Connection cover · IP65
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
ELCIS A/9115C absolute fieldbus encoder
Dimensional drawing of the ELCIS A/9115C absolute fieldbus encoder

Related documentation, cases, and guides

Other products

DPF Sensors logo
Humidity and temperature sensor for walls, ducts and exteriors
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Flange Ø115 B10, shaft Ø11 h7 | Up to 2²⁴ steps in 4096 turns | Gray, binary or BCD | Parallel NPN/push-pull or SSI RS422 | Power supply 5 ±5 %, 8–24 or 18–28 V | IP64 shaft (IP65 sealed) | Optional latch, zero LED, multiplexer
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Combined glass/gel reference pH electrode, epoxy body. 1.5m cable with BNC.
NESA Environmental Meters
Manual | Class A or A+ | 200 cm² | 0 ÷ 12.5 mm | 0.05mm / 0.04mm | 0 ÷ 60°C
Dimetix_AG-1
High-Durability Industrial Connectivity for Electrical and Data Transmission Range: 5 Meters in length with certified IP65 protection
DPF Sensors logo
Industrial linear resistive sensor • 10 to 200 mm • multiple versions • infinite resolution
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Output 4 … 20 mA or 0 … 20 mA | Electrical stroke 10 mm | Linearity ±0.1 … ±0.4 % | Return stem | 18 … 30 VDC | IP50 or IP67 | 2 m cable
LVDT Manufacturer Logo Schreiber Messtechnik
Half-bridge inductive transducer | Strokes from 12 to 360 mm depending on series | Housing Ø12 mm | Linearity 0.25 % / 0.5 % | Up to IP68 | External electronics 10 kHz
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
CANopen (C2) or fiber optic (CF) | Housing Ø58 mm, servo-type mounting | Shaft Ø6 f6 (Ø10 optional) | 16 bit; 30 bit at 16384 turns | 10–30 V DC | IP64 shaft (IP66 sealed)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø114, flange B10 Ø115 | Shaft Ø11 h7 stainless steel | 1 to 90000 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP66 shaft (IP67 sealed) | CE Ex II 3GD, category 3
Shopping Basket