FTI 10 Inductive Position Transducer with Return
- Manufacturer: Novotechnik
- Category: Displacement, Amplified LVDTs, SENSORS, LVDT Sensors
Novotechnik FTI 10 inductive position transducer. Differential transformer with moving core, contactless.
Transductor inductivo de posición lineal con transformador diferencial de núcleo móvil, vástago con retorno elástico y cabezal de palpación. Carrera eléctrica de 10 mm. Linealidad absoluta de hasta ±0,1 %. Alimentación de 24 VDC; salida de 4 … 20 mA o de 0 … 20 mA. Sellado IP50 o IP67.
Key points
- Linearity up to ±0.1 %
- +24 VDC power supply
- Standard output of 4 … 20 mA or 0 … 20 mA
Technical Frequently Asked Questions
What can be connected to the FTI 10 inductive position transducer?
It can be connected to couplings and mountings for linear sensors from Novotechnik.
How do I order the FTI 10 inductive position transducer?
The order code has 5 fields: electrical stroke (mm), linearity, protection, output, and cable. For example, FTI-10-1-50-4-K1 (Art. 400053101) is the version with an electrical stroke of 10 mm, linearity of ±0.1 %, IP 50 protection, output of 4…20 mA, and a 2 m cable. All order references with their corresponding Art. are listed in the reference table on this page.
Under what conditions does the FTI 10 inductive position transducer operate?
Operating temperature: -25 … +70 °C. Protection: IP 50, IP 67.
Properties
| Feature | Specification |
|---|---|
| Electrical data | |
| Defined electrical stroke (symmetrical within the mechanical stroke) | 10 mm |
| Absolute linearity (with respect to the electrical center) | ±0.2 % / ±0.4 % / ±0.1 % FS |
| Exit sign | 4 … 20 mA (load < 500 Ω) or 0 … 20 mA (load < 500 Ω) |
| Repeatability (typical) | < 2 µm |
| Hysteresis (typical) | < 10 µm |
| Dynamic frequency (typical) | < 250 Hz |
| Supply voltage | 18 … 30 VDC |
| Maximum current consumption | < 50 mA |
| Temperature coefficient of the center of the sensitivity range | < 100 ppm/K |
| Maximum permissible voltage between the output terminals and the housing | 100 VDC |
| Dielectric strength (50 Hz, 500 VAC) | < 100 µA |
| Reverse polarity protection | Yeah |
| Electronics | Hybrid circuit |
| Mechanical data | |
| Mechanical engineering | 12 mm |
| Measuring force required with IP 50 (standard) | 4 N |
| Required measuring force with IP 67 (optional) | 10 N |
| Permissible tightening torque on the tightening flange | 25 Nm |
| Mechanical life (affected by the radial load on the stem) | 100 × 10⁶ movements |
| Total mass (without cable) | 90 g |
| Housing | Anodized aluminum |
| Entrance stem | Anti-magnetic stainless steel, with elastic return and anti-rotation |
| Palpation head | Stainless steel with M 2.5 external thread and press-fit steel ball |
| Bearing | Maintenance-free plastic |
| Fixation | Centering collar with M 16 x 1.5 thread or with clamping flanges in the groove |
| Connection | Flexible shielded 3-wire cable of approx. 2 m, which comes out of the casing on the side |
| Wire | PUR, 3 x 0.14 mm²; copper wire mesh with 85 % coverage |
| Maximum length of the connection cable | 30 m |
| Environmental conditions | |
| Working temperature | -25 … +70 °C |
| Operating frequency | < 10 Hz |
| Shock | 50 g, 11 ms |
| DIN EN 60529 protection | IP 50, IP 67 |
| Reference | Configuration |
|---|---|
| FTI-10-1-50-0-K1FTI101500K1 | Art. 400053105 |
| FTI-10-1-50-4-K1FTI101504K1 | Art. 400053101 |
| FTI-10-1-67-0-K1FTI101670K1 | Art. 400053107 |
| FTI-10-1-67-4-K1FTI101674K1 | Art. 400053103 |
| FTI-10-2-50-0-K1FTI102500K1 | Art. 400053104 |
| FTI-10-2-50-4-K1FTI102504K1 | Art. 400053100 |
| FTI-10-2-67-0-K1FTI102670K1 | Art. 400053106 |
| FTI-10-2-67-4-K1FTI102674K1 | Art. 400053102 |
| FTI-10-4-50-0-K1FTI104500K1 | Art. 400053114 |
| FTI-10-4-50-4-K1FTI104504K1 | Art. 400053110 |
| FTI-10-4-67-0-K1FTI104670K1 | Art. 400053116 |
| FTI-10-4-67-4-K1FTI104674K1 | Art. 400053112 |
Other products
