B&C SZ142 pH Sensor
Combined glass/gel reference pH electrode, epoxy body. 1.5m cable with BNC.
- Manufacturer: B&C Electronics
- Category: Water quality, SENSORS, pH and Redox Probes
The B&C Electronics SZ142 pH sensor is a universal digital sensor, compatible with all pH controllers on the market and for all types of stable processes. It provides reliable measurements even at the extremes of the pH range.
This pH electrode allows for precise measurement at an extraordinary cost. Its bulb is constructed of extra-hard glass, while the body is made of epoxy for added protection.
It contains a potassium chloride (KCl) solution inside, which extends its useful life and keeps it in good condition. The sensor does not require additional electrolyte.
Specially designed for use in swimming pools and spas.
Properties
- Measuring range: 0 to 13 pH
- Temperature range: 0 to 80 °C
- Body material: Epoxy
- Maximum pressure: up to 8 bars
- Connector: 1.5m cable with BNC connector
- Dimensions: 110 mm in length and 12 mm in diameter
- Application: Measurement in swimming pools and spas
- Zero Point: pH 7
- Accuracy: ± 0.03 pH unit
- Response time: < 10 seconds (95% response)
- pH electrode solution: pH buffer with added chloride
- Reference type: Annular ceramic, sealed
- External reference electrode solution: Polysaccharide gel, 4M KCI with AgCI
Other products
Industrial rotary potentiometer of 5 kΩ with continuous 360° rotation and IP65 protection.
Eje hueco Ø10 H7, opc. Ø6, 8 o 9,52 | Hasta 65536 pasos × 16384 vueltas | SSI (RS422), preset opcional | Alimentación 10–30 V | IP65 eje (IP66 sellado) | Acoplamiento en estrella, ±3 mm ax. | Código Gray o binario
Angular LVDT | Ranges 30° to 120° | Accuracy up to 0.25% | Integrated Electronics | Robust Housing Ø 58 mm | Outputs 4-20mA / ±10V
Carcasa Ø55 mm | Eje Ø8 h7 inoxidable | 1 a 1270 impulsos/vuelta | NPN, PNP, push-pull, driver, TTL | Alimentación 5–30 V | IP64 eje, IP66 sellado | 60 kHz (160 kHz opcional)
Eje hueco Ø10, 12, 14, 15 o 20 mm | Carcasa Ø72 mm | 1 a 25000 imp/vuelta | NPN, PNP, push-pull, driver, 1 Vpp | Alimentación 5–30 V | IP64 eje (IP66 sellado Z) | Compensa ±3 mm axial, ±2°
B10 flange Ø115 mm, shaft Ø11 h7 | 1–10000 and 1–2540 imp/revolution | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP65 shaft (IP66 sealed) | Two galvanically isolated outputs | Radial/axial load 15 kg
DeviceNet (D2), programmable speed | Ø59 mm, servo-type mounting | Hollow shaft Ø15 F7 with coupling | 16-bit; 30-bit at 16384 revolutions | 10–30 V DC | IP64 shaft (IP66 sealed)
Linear Range 0-5mm | Sensitivity 4mV/µm | AISI 4140 Stainless Steel | Probe -30 to 180°C | Driver -20 to 80°C | M16 x 1 Thread | Frequency DC-10kHz | Linearity <1% | PEEK Tip | PTFE Cable