Incremental Encoder for Motors I/72E

Budget-friendly price Request a quote
Hollow shaft Ø6–15 mm | Standardized flange Ø72 mm | 1 to 25000 imp/revolution | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP64 shaft (IP66 sealed) | Internal helical coupling

The ELCIS 72E (I/72E) is an incremental encoder with a standardized Ø72 mm flange, internal helical coupling, and a capacity of 1 to 25,000 pulses per revolution. It is designed for installation on motors.

The maximum coupling compensation is ±0.25 mm axial, ±0.05 mm radial, and ±2° angular. The hollow shaft is made of Ergal, from Ø6 to Ø15 mm, with an anodized aluminum base, a Valox 420 cap, and weighs 400 g.

It delivers from 1 to 25000 pulses per revolution with a maximum frequency of 100 kHz (300 kHz optional), 5 to 30 V power supply depending on the version and IP64 on the shaft side (IP66 with sealed bearing); the IP on the output side depends on the connection.

  • Internal helical coupling: max. axial compensation ±0.25 mm, radial ±0.05 mm, angular ±2°.
  • Hollow Ergal shaft: Ø6, Ø8, Ø10, Ø12 or Ø15 mm (Ø n on request).
  • Output electronics: NPN, PNP, push-pull, line driver, TTL, discriminator and sinusoidal 1 Vpp.
  • Connections: 1 m CW cable (IP65), 4 to 12 pole connectors (IP63 to IP67) and cable end connector, with axial or radial output.

Technical Frequently Asked Questions

How much does the coupling of the I/72E encoder compensate?

Maximum coupling compensation: axial ±0.25 mm, radial ±0.05 mm and angular ±2°.

What material is the shaft of the I/72E made of?

Hollow Ergal shaft, in Ø6, Ø8, Ø10, Ø12 or Ø15 mm (Ø n on request).

What resolutions does it accept?

From 1 to 25000 pulses per revolution, with a maximum frequency of 100 kHz (300 kHz with the W option).

Properties

FeatureSpecification
Mechanics
Weight400 g
AxisHollow shaft Ø 6÷15 mm in Ergal (customizable upon request)
max. axial/radial load.6 kg
Bearing life1.5 × 10⁹ revolutions
Electric
Exit-side protectionAccording to connection: IP63 to IP67
Feeding5÷30 Vcc according to version
Max. consumption.120 mA Standard / 180 mA line driver (customizable upon request)
Impulses per lap1 to 25000
Max frequency.100 kHz (300 kHz optional)
Protection and environment
axle-side protectionIP64 standard / IP66 sealed
max. continuous RPM6000 rpm standard / 3000 rpm sealed (intermittent: +30 %)
Impact resistance50 G × 11 ms
Vibration resistance12 G (10 ÷ 2000 Hz)
Working temperature0 ÷ +70 °C (customizable upon request)
Storage temperature-30 ÷ +85 °C
ReferenceConfiguration
I/Z72E12-2500-824-BB-CW-R-01IZ72E122500824BBCWR01Sealed ball bearing · 12 mm shaft · 2500 pulses/revolution · 8 ÷ 24 V · Bidirectional · Push-pull pro · Axial or radial cable (1 m, IP65) · Radial output
Incremental encoder for ELCIS I/72E motors
Dimensional drawing of the incremental encoder for ELCIS I/72E motors

Related documentation, cases, and guides

Other products

FUEL FLOW METERS
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
CANopen | Ø 79 mm | Resolution 14 bits | Shaft Ø 13 mm or Ø 10 mm | 12/24 VDC (8 … 34 VDC) | IP67/IP69K | 360°, 1 or 2 channels
Monitran-Logo
100 mV/g ±10% (IEPE) | 2Hz to 12kHz ±5% | ±50g | 40g | -25 to 120°C | C5015 2-pin connector | Ø19 mm base | Stainless steel, IP67
Disibeint Electronic, manufacturer of level sensors and control relays
HYPALON ECO LEVEL SWITCH
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Absolute, wire Ø 1.35 mm | Stroke 40, 50 or 60 m | Resolution 0.1 or 1 mm | PROFIBUS-DP Class 2 | 10–30 V DC | IP64 (IP65 connection covers) | Linearity ±0.05 % fs.
Monitran-Logo
4-20 mA ∝ rms acceleration | 0-1 to 0-20g | 2Hz to 1kHz ±10% | Ex ia IIC T6 Ga · Ex ia IIIC T85 °C Da | Ui 28 V · Ii 93 mA · Pi 0.65 W | 12-32V DC | Stainless steel, integrated cable, IP67 (IW: IP68)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
B10 flange Ø115, centered Ø85 h7 | Shaft Ø10 h7 | 24 or 25 bit (12 + 12/13 bit) | SSI RS422, Gray code | 5 V ±10 % or 10–30 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6
ATESTEO LOGO, manufacturer of torque sensors
Inductive Transducer | Limit 3,000 N·m | 16,000 RPM | PCD Flange 130.0 mm | Accuracy 0.02% | Inertia 0.0093 kg·m²
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
DeviceNet (D2), programmable speed | Housing Ø58 mm, servo mounting | Shaft Ø10 h8 (Ø6 optional) | 16 bit; 30 bit at 16384 revolutions | 10–30 V DC | IP64 shaft (IP66 sealed)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø63 mm | Shaft Ø6 h7 stainless steel | 1 to 25000 pulses/revolution | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft, IP66 sealed | Option 1 Vpp sinusoidal
Shopping Basket