A/958HD Absolute Fieldbus Encoder

Budget-friendly price Request a quote
DeviceNet (D2), programmable speed | Housing Ø58 mm, servo mounting | Shaft Ø10 h8 (Ø6 optional) | 16 bit; 30 bit at 16384 revolutions | 10–30 V DC | IP64 shaft (IP66 sealed)

The ELCIS 958HD (A/958HD) is a DeviceNet absolute encoder, single-turn and multi-turn (single-rotation and multi-rotation) with a Ø58 mm diameter, servo mounting, and a Ø10 shaft. It is servo-mounted using front clips or screws.

The A/958HD is a single-turn or multi-turn absolute encoder with a DeviceNet (D2) interface and an ISO 11898 CAN transceiver, featuring programmable baud rates. It allows selection of 4096, 8192, 16384, 32768, or 65536 steps per revolution and 1, 4096, or 16384 revolutions, with a maximum of 30 bits of binary code. It includes two status LEDs and SMD technology, with optical LED readout and an IR photodiode array ASIC.

Built with a Ø58 mm aluminum housing and a Ø10 h8 stainless steel shaft (Ø6 optional), it supports axial and radial loads of 40 and 110 N. It has IP64 protection on the shaft side (IP66 in the sealed version), withstands impacts of 30 G and vibrations of 10 G, and operates from -40 to +85 °C.

  • Interface DeviceNet (D2) with CAN transceiver ISO 11898.
  • Resolution of up to 16 bit per turn and 30 bit in 16384 turns.
  • Programmable transmission speed and 2 LED of state.
  • Nutrition 10–30 V DC with maximum consumption of 2.5 W.

Technical Frequently Asked Questions

What resolutions and frame rates does the A/958HD allow you to configure?

It allows you to choose 4096, 8192, 16384, 32768 or 65536 steps per revolution and 1, 4096 or 16384 revolutions, with a maximum resolution of 30 bits at 16384 revolutions.

What parameters are programmable in the DeviceNet interface?

Direction of rotation (complementary), total resolution, resolution per revolution, preset value and transmission mode: polled mode, cyclic mode or cos mode.

What connections are available?

3 IP65 cable glands (3PG), 3 IP65 steel cable glands (3PG-VA), 2 IP65 Ø 9–13 mm cable glands (2M20) and IP65 5-pin round connector (1BW).

Properties

FeatureSpecification
Mechanics
HousingAluminum (customizable upon request)
Weight550 g single turn · 600 g multiturn
AxisØ10 h8 stainless steel (optional Ø6)
max. axial/radial load.40 / 110 N
Electric
Exit-side protectionIP65 according to connection
Power supply / max. consumption.10–30 V DC · 2.5 W
Max frequency.800 kHz
Exit codeBinary
Division accuracy±½ LSB (<13 bit) ±2 LSB (13–16 bit)
Max resolution.16 bit/turn · 30 bits in 16384 turns
InterfaceDeviceNet (D2) · ISO 11898 CAN transceiver · programmable transmission speed
Protection and environment
axle-side protectionIP64 standard · IP66 sealed
max. continuous RPM6000 standard · 3000 sealed (intermittent: +30 %)
Impact/vibration resistance30 G (11 ms) 10 G (10–1000 Hz)
Operating/storage temperature-40 … +85 °C / -40 … +85 °C
ReferenceConfiguration
958HD-12-12-10-B-D2-0-3PG958HD121210BD203PG4096 steps/rev. · revolutions: 4096 · shaft Ø10 mm · Binary · DeviceNet · 3 cable glands · IP65
A/958HD12-12-10-B-D2-0-3PGA958HD121210BD203PG4096 steps/rev. · revolutions: 4096 · shaft Ø10 mm · Binary · DeviceNet · 3 cable glands · IP65
ELCIS A/958HD absolute fieldbus encoder
Dimensional drawing of the ELCIS A/958HD absolute fieldbus encoder

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Pinion with 13, 16, or 34 teeth or Ø8 shaft | Radial output | 1 to 2540 pulses/revolution | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP66 shaft side | Max. frequency 60 kHz (100 options)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Ratiometric output 0.25…4.75 V | Ø 22mm | Resolution 16 bits | Shaft Ø 6 mm | 5 VDC (4.5 … 5.5 VDC) | IP50/IP65 | Measurement range: 44 turns (15840°)
DPF Sensors logo
Wire displacement sensor, ranges from 1000 mm to 4000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Ø10 h7 | Housing Ø58 mm, centered Ø36 h7 | 1 to 1024 imp/revolution | NPN, push-pull or line driver | Power supply 5–30 V | IP54 shaft (IP65 Z-seal) | Max. frequency 60 kHz
Monitran-Logo
Triaxial X, Y, Z | 3 isolated AC outputs 100 mV/g ±10% | 2 Hz to 10 kHz ±5% | ±80 g | -55 to 140 °C | 4-pin M12 connector | 304 stainless steel, IP67
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø58, shaft Ø10 h7 | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP66 sealed) | Gray, Binary, Excess or BCD
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
SPI (TTL) | Ø 48 mm | Resolution up to 14 bits | Shaftless: magnetic position marker | 5 VDC (4.5 … 5.5 VDC) | IP67 / IP68 / IP69
DPF Sensors logo
Combined humidity and temperature sensor, high quality sensor, duct and outdoor.
Monitran-Logo
4-20 mA ∝ rms speed | 0-10 to 0-100 mm/s | 2Hz to 1kHz ±10% | Ex ia IIC T6 Ga · Ex ia IIIC T85 °C Da | Ui 28 V · Ii 93 mA · Pi 0.65 W | 12-32V DC | Stainless steel, integrated cable, IP67 (IW: IP68)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø63 mm | Shaft Ø6 h7 stainless steel | 1 to 25000 pulses/revolution | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft, IP66 sealed | Option 1 Vpp sinusoidal
Shopping Basket