DMF FLOW METERS
FUEL FLOW METERS
FLOW METERS for measuring fuel consumption in maritime transport, locomotives, diesel generators, burners, mining machinery, etc.
Properties
| Wide range of models for measuring liquids, especially fuel, consumption control of engines, boilers, burners, etc. Pulse output signal, RS232, RS485, CAN, Bluetooth, with or without Display Flow rates up to 25 m3/h |
Precision: 0.1 m/s
Other products
Reference Torque Gauge | 20,000 – 30,000 N·m | 0 RPM | PCD Flange 218.0 mm | Inertia 0.1558 kg·m²
Combined pH electrode with glass body, double ring junction, 0–13 pH range and 1.5 m cable with BNC connector.
Wind speed sensor, industrial anemometer made of metal or carbon fiber, with different types of output signals
Carcasa Ø63 mm | Eje Ø6 h7 inoxidable | 1 a 25000 impulsos/vuelta | NPN, PNP, push-pull, driver, TTL | Alimentación 5–30 V | IP64 eje, IP66 sellado | Opción sinusoidal 1 Vpp
Anemometer with pulse output, proportional to wind speed, industrial use
Amplified LVDT | Range 80 to 360 mm | Stainless Steel Housing Ø 25 mm | IP66 | Outputs 4-20mA / ±10V | Clamp Mounting
Shaft Ø9.52 h7 | Square flange 63.5 mm | 1 to 1024 imp/rev | NPN, push-pull or line driver | Power supply 5–30 V | IP54 shaft (IP65 Z seal) | Max. frequency 60 kHz
Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in data logger + display.
Output 10-100mV/g | Frequency 2Hz-8kHz | Negative Power Supply -24VDC | Temperature -55 to 140°C | IP67 Protection | Stainless Steel | Isolated AC Output | Isolated Base | 3-Wire Connection | Top Entry Mounting
Eje pasante Ø50, 55, 60, 65, 70, 75 | Carcasa Ø170 mm | 1 a 9000 imp/vuelta | NPN, PNP, push-pull, line driver | Alimentación 5–30 V | IP55 eje (IP66 sellado Z) | Acoplamiento tangencial interno